RN2402S,LF(D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The RN2402S,LF(D) is a single, pre-biased bipolar transistors (BJT) device, commonly used as a switch or amplifier in a variety of applications. The device has a max voltage of 30V, a max load current of 200mA and a max output power of 300mW.

The RN2402S,LF(D) consists of two bipolar transistors; one N-channel and one P-channel. These transistors are connected in a common emitter configuration, with the base of the N-channel transistor connected directly to the collector of the P-channel transistor. This configuration allows the transistor’s gain to be optimized for a wide range of applications. The transistors are also biased for optimal current control, allowing the device to operate with a reduced quiescent current.

The common emitter configuration enables the RN2402S,LF(D) to be used as a switch or amplifier in both high and low voltage applications. When used as a switch, the device can be connected in series with a load and the voltage at the base will remain constant, regardless of the current through the load. This feature allows the RN2402S,LF(D) to be used as a switch in high voltage applications without the need for an external power supply.

When used as an amplifier, the device acts as a voltage controlled resistor. When the base voltage is increased, the collector current also increases, causing a large amplification of the signal at the collector. This allows the device to be used as an amplifier in a variety of applications, such as audio and RF amplifiers.

The RN2402S,LF(D) is a versatile device that offers the benefits of a low voltage, low power transistor in a wide range of applications. The device is also relatively easy to use, allowing for easy integration into existing circuits. With its pre-biased design and wide range of features, the RN2402S,LF(D) is an ideal choice for a variety of automotive, consumer and industrial applications.

The specific data is subject to PDF, and the above content is for reference