S6010VTP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors, commonly referred to as SCRs or silicon-controlled rectifiers, are four-layer semiconductor devices with three terminals. They are the central components in many electrical and electronic circuits, controlling the direction of electrical current with an actuating signal. Among various thyristors, the S6010VTP is widely used in many applications.

The S610VTP is a PNPN (positive-negative-positive-negative) silicon-controlled rectifier package, and the package has four terminals. It is usually used for high-power electrical circuit control applications such as motor control, lighting, and heating. The SCR can be used to adjust the voltage and current in the circuit, allowing for finer control and precision of the electrical output. These features make the S6010VTP ideal for a variety of commercial, industrial, and military applications.

The S6010VTP has a typical switching off-state voltage threshold of 270V, meaning that the normal amount of current needed to turn the SCR on is 270V. In addition, the trigger current is 0.6mA and the trigger voltage is around 0.8V. Furthermore, the on-state voltage drop is 4V at a 30A current level, while the maximum off-state current leakage is 5μA at 25°C.

The basic principle of operation in the S6010VTP is that a small current pulse is applied to its gate to turn the SCR on, allowing for large current to flow through the main terminals. The SCR can then be kept in this on-state until an offsetting current is applied. This enables a very precise level of control of the voltage and current levels in the main circuit, allowing for more efficient operation.

The S6010VTP is a highly reliable and robust device due to its low gate current and a trigger current-trigger voltage ratio. In addition, because of its insulating base and two-stage latch structure, it is able to withstand higher surge voltages without triggering. Therefore, it is preferred in environments with high operating temperatures and high surge voltages.

Due to its various performance characteristics, the S6010VTP is used in a wide range of applications such as motor control, lighting, heat control, and various other industrial control applications. It is used in AC and DC power circuits, uninterruptible power supply (UPS) systems, choppers, phase control rectifiers, phase angle controllers, overvoltage protection, and electricity meters. The S6010VTP\'s combination of high current capability and precise control makes it an ideal choice for many applications.

In conclusion, the S6010VTP SCR is a versatile thyristor device with a wide range of uses, from AC and DC power applications to industrial control applications. The device\'s high on-state voltage drop, low off-state current leakage, and high surge capability make it a robust and reliable component. Its user-customizable performance characteristics make it a highly desirable choice for many applications.

The specific data is subject to PDF, and the above content is for reference