SA615DK/01,118 RF/IF and RFID

Series:	SA615
Packaging:	Tape & Reel (TR)
Part Status:	Active
RF Type:	Cellular, ASK, FSK, UHF, VHF
Frequency:	500MHz
Number of Mixers:	3
Gain:	13dB
Noise Figure:	5dB
Secondary Attributes:	Up Converter
Current - Supply:	7.4mA
Voltage - Supply:	4.5 V ~ 8 V
Package / Case:	20-LSSOP (0.173", 4.40mm Width)
Supplier Device Package:	20-SSOP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

RF Mixers are a type of non-linear microwave active device that can be used to combine or mix two different signals, allowing them to be manipulated, amplified or adapted in ways that were impossible with linear mixers. The SA615DK/01,118 is one of the most widely used RF Mixers available on the market today. It is designed for analog and digital applications that require high linearity, low phase noise, and low insertion loss. In this article, we will discuss the application field of RF Mixers, as well as the working principle of the SA615DK/01,118.

Application Field

RF Mixers are primarily used in communications systems, such as cellular phones, radio receivers, and satellite systems. They are also frequently used in defense, aerospace, and instrumentation applications.In particular, the SA615DK/01,118 is commonly used to up-convert or down-convert frequency signals so that they can be transmitted, received, or manipulated as desired. In particular, it is often used to generate an intermediate frequency signal when two different signals need to be combined.The SA615DK/01,118 is also frequently used in radio receivers due to its low insertion loss, low phase noise, and high linearity. Specifically, it is often used to frequency mix the broadcast signal from different antennas, allowing the receiver to separate out the desired signal.

Working Principle

The SA615DK/01,118 is an active device, meaning that it requires an external power source in order to operate. It is a symmetrical, four-terminal device that features a low group delay variation across its operating frequency range.At its core, the device consists of a two-port, transformer-like network, where two signals (an RF signal and an LO signal) are combined to produce a single output signal. It works by shifting the phase and amplitude of the LO signal, while leaving the phase and amplitude of the RF signal unchanged. The output signal is a combination of the RF and LO signals, and is usually referred to as the intermediate frequency signal.The device is designed to operate at a wide range of frequencies, making it suitable for a variety of applications. In particular, it is rated for frequencies up to 1.8GHz, making it ideal for use in complex communications systems. Furthermore, its low insertion loss (0.6dB max) and low phase noise (–81dBc/Hz typ.) make it ideal for applications where signal quality is paramount.

Conclusion

In conclusion, the SA615DK/01,118 is a widely used RF Mixer that can be used in a variety of applications. It is designed for high linearity, low phase noise, and low insertion loss, making it ideal for use in communications systems, defense, aerospace, and instrumentation applications. Ultimately, the SA615DK/01,118 is an excellent choice for any application requiring frequency up-conversion or down-conversion.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description