SBRT6U45LP-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SBRT6U45LP-7 is a rectifier diode with a single-phase bridge configuration that is most commonly used in AC to DC power conversion applications. It is designed for use in battery chargers, converters, DC-DC converters, AC/DC adapters, and power supplies. The device has a maximum forward blocking voltage of 45 V and a reverse repetitive voltage of 6 V, with a maximum continuous forward current rating of 6 A.

In a rectifier diode, an electrical current is coming out of a diode. It is not constantly open, but instead works like a switch, letting current pass through when the electrical potential difference across its terminals is positive. This current flow is known as a forward bias. If the electrical potential difference across the terminals is reversed, the diode will not allow a current to pass through and will instead block current flow. This state is known as a reverse bias. The diode\'s reverse voltage breakdown voltage refers to the voltage at which the diode begins to allow current to flow in a reverse direction. In the case of the SBRT6U45LP-7, the reverse voltage breakdown voltage is 6V.

The SBRT6U45LP-7 rectifier diode has a condition known as “high isolation” between its anode and cathode leads, meaning that the diode is able to block an oscillating signal from being conducted from the anode lead to the cathode lead, protecting sensitive circuits from potentially damaging oscillations. The device has forward and reverse recovery times of 20 ns and 35 ns respectively, meaning that it is able to switch quickly and efficiently.

The SBRT6U45LP-7 is commonly used in AC to DC conversion applications, commonly seen in the power supplies of electronic devices, as well as in electronic home appliances such as televisions, washing machines, and air conditioners. It is also commonly found in motor control circuits, inverters, UPSs, and solar residential systems. The SBRT6U45LP-7 device is also used in automotive applications, such as power seats and car audio systems.

The SBRT6U45LP-7 rectifier diode is primarily designed for use in AC to DC power conversion applications. It is designed to quickly and reliably convert AC voltage to DC voltage, and provides the necessary isolation to protect sensitive circuits from oscillating signals. The device’s wide operating temperature range and low reverse breakdown voltage make it well-suited for a variety of applications, from automotive to residential power systems.

The specific data is subject to PDF, and the above content is for reference