SCC2681AE1A44,518 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SCC2681AE1A44,518 is a universal asynchronous receiver transmitter (UART) interface specifically designed for communications between asynchronous serial equipment. It is most commonly used in applications such as data collection, data logging and point of sale systems. The SCC2681AE1A44,518 is implemented as a basic form of a UART, providing convenience and low implementation cost.

A UART is an asynchronous communication device which transfers data over two separate lines (TX and RX). UARTs typically use the following components: the encoder, transmitter, and receiver. The encoder converts data (or instructions) into serial data bit sequences that can be transmitted and understood by a receiver, while the transmitter physically transmits the signal over the TX line. The receiver receives information from the TX line and decodes it, reverting it back to its original form. To accurately receive data, the receiver also includes a baud-rate timer, which is responsible for synchronizing the transmitted signal’s data rate.

The SCC2681AE1A44,518 utilizes a 16-bit instruction set as well as a 64-pin surface mount package. Additionally, the device is built with dual enhanced Universal Asynchronous Receiver Transmitter (eUART) blocks and two 500-byte transmit and receive FIFOs. The FIFOs allow efficient data flow for almost any application, including the point of sale (POS) or data collection systems.

The SCC2681AE1A44,518 supports a wide range of baud rates from 150 to 3.2 Mbps. In addition, the device supports standard UART protocol, including SCC2681AE1A44,518/N81, SCC2681AE1A44,518/E81, and SCC2681AE1A44,518/O81 frame formats, as well as POLL/SELECT and 9-bit communication methods. This device is capable of the highest levels of performance. Additionally, the SCC2681AE1A44,518 is designed to be robust and reliable. It is built with ESD (Electrostatic Discharge) protection, at least +8 KV human body model protection, and is constructed with an aluminum coating to protect against environmental contaminants.

The SCC2681AE1A44,518 device is ideal for applications such as POS and data collection systems as well as remote control, telemetry, and combat communication applications. It is designed with two block level hubs and two TX/ RX FIFO memories. This allows for faster and more efficient data transmission. The device also supports standard UART communication protocols and offers a wide range of baud rate support from 150 to 3.2 Mbps. The device is robust, with ESD protection, a minimum +8 KV human body model protection, and aluminum coating for added environmental protection.

In summary, the SCC2681AE1A44,518 is a UART device specifically designed for communication between asynchronous serial equipment. It is an easily implemented, low cost interface option for applications such as POS and data collection systems as well as remote control, telemetry, and combat communication applications. The device boasts two eUART blocks and two 500-byte transmit and receive FIFOs, supports a wide range of baud rates, and is robust with ESD and a minimum +8 KV human body model protection. It is perfect for applications needing efficient data and reliable communication.

The specific data is subject to PDF, and the above content is for reference