SCC2691AE1A28,623 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Universal Asynchronous Receiver Transmitter (UARTs) is a type of interface that is used to connect external devices for the transfer of data, usually over serial communication lines. Among these devices is the SCC2691AE1A28,623, which is a short-range UART chip. This chip is commonly used in embedded systems, such as those found in automobiles, industrial sensors, and home automation, wherever there is a need for high-speed serial data communications, as well as providing a signaling protocol to drive serial data streams.

The SCC2691AE1A28,623 is a digital-to-analog converter and is composed of several components, including a register, three buses, one clock, two ports, and two bit drivers. The integrated circuit includes the capability to convert data streams into parallel 8-bit words. As for the primary application field for this chip, it is mainly used for establishing an interface between different device types, such as a wireless transceiver, a microcontroller, or a sensor. To establish this interface, SCC2691AE1A28,623 must interact with various hardware in the system.

The SCC2691AE1A28,623 is usually used for transferring data between two devices, one in a master controller role and the other in a slave controller role. The master controller is responsible for initiating a request or transaction, and the slave controller must respond with the requested data or data stream. For this scenario, the master controller is typically a microcontroller, while the slave controller is a UART. The data is transferred on the bus via the UART’s handshake protocol.

As for the working principles of the SCC2691AE1A28,623, its architecture is based on the 8-bit buffering system. This chip is used to convert serial data into parallel 8-bit words and place these words into the register. A clock signal is generated at the slave controller’s side to allow the master controller to access the data. This clock must be synchronized with the master controller in order for data transmission to take place. To achieve this, the SCC2691AE1A28,623 is fitted with output ports, which are used to transmit the data stream. The output ports contain three buses, one for the receive bit, one for the clock, and one for the transmit bit.

When the register receives a serial data stream from the master controller, it is converted into parallel words and stored. The clock signal, generated at the output ports, is then sent to the receive bit. This serves to sync the master controller’s clock cycle with the data being transmitted. Once the synchronization is established, the master controller can then read the data stream from the register. The slave controller is also able to store data generated by the master controller, which is then returned to the master as a response to a particular request.

In addition, the data streaming capabilities of the SCC2691AE1A28,623 allows for a high speed and low latency communication between devices. Compared to standard serial communication techniques, the SCC2691AE1A28,623 ensures a faster transfer rate, up to 150 kbps, with a latency of only 50 ns. Moreover, the chip’s output ports allow for flexible configurations, allowing for various transmission protocols, such as RS232 and RS485.

The SCC2691AE1A28,623 is a powerful and reliable UART chip that can be used to facilitate communications between different types of devices. It is well-suited for applications that require a fast and low-latency data transfer with a high-quality interface. Furthermore, its flexible port configuration makes it easy to integrate with different types of hardware. Because of all these features, it is an ideal choice for many embedded systems.

The specific data is subject to PDF, and the above content is for reference