SD25-0827R8UU12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF diplexers are components that effectively divide an RF signal into two or more frequency-based parts. This generally involves two separate components that work together, the high-pass filter and the low-pass filter. The high-pass filter allows frequencies above a specified cut-off frequency while the low-pass filter allows frequencies beneath a specified cut-off frequency. The SD25-0827R8UU12 is a special type of RF diplexer for performing this task.

The SD25-0827R8UU12 is primarily used in mobile wireless networks such as GSM, CDMA and W-CDMA technologies. It is designed to handle a wide range of frequencies, from 800 MHz up to 2.7 GHz. The device provides high rejection levels across its pass bands and is designed to minimize insertion loss. It is also relatively small in size, making it ideal for applications where space is limited.

The SD25-0827R8UU12 is a combination of two filter sections, low-pass filter (LPF) and high-pass filter (HPF). The LPF can be configured to block signals below a certain frequency, allowing only those above the specified cut-off frequency to be passed. The HPF is capable of blocking signals above a certain frequency while simultaneously allowing those below the cut-off frequency to pass. When combined, the two filter sections act together as an RF diplexer, separating the incoming signal into two distinct bands.

The SD25-0827R8UU12 is designed in such a way that the HPF and LPF can be independently controlled, making it easier to select the cut-off frequencies for each section. The device is capable of handling large signal peaks without any problems due to its high isolation properties and low insertion loss. This makes it a very reliable and efficient RF diplexer for use in mobile communication systems.

The working principle of the SD25-0827R8UU12 is fairly straightforward. The incoming signal is split into two sections using the LPF and HPF sections of the device. The low frequency signal is then passed through the LPF section while the high frequency signal is passed through the HPF section. Depending on the settings of the filters, the incoming frequency can be divided into two or more distinct bands.

The SD25-0827R8UU12 is a great example of an RF diplexer that provides efficient division of signals into two or more distinct bands. It is a compact and reliable device that can handle large signal peaks without any problems. With its ability to independently control the LPF and HPF sections, it is an ideal choice for applications where space is limited and signal integrity is essential.

The specific data is subject to PDF, and the above content is for reference