SD25-0836R9UBQ1 RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Diplexers are a type of filter which helps in passing and separating two or more frequencies along with their associated signals. This type of filter is made from either capacitors and inductors or a combination of both. They are designed to pass or reject certain frequencies while allowing others to pass through them. These types of filters are widely used in applications such as broadcast radio, television, cell phones, and other wireless communication systems.The SD25-0836R9UBQ1 is a type of RF Diplexer. It is suitable for Wi-Fi systems, 2.4GHz ISM, Bluetooth, and GPS applications. It is a low-cost, low-power solution for Wi-Fi applications. The SD25-0836R9UBQ1 allows both the 2.4GHz ISM band and the Wi-Fi bands to be connected to the same input frequency without any loss of signal.The SD25-0836R9UBQ1 has two ports for input and output. The first port is connected to the input signal from the radio frequency (RF) source, while the second port is connected to the antenna. The diplexer works by passing the desired signal frequencies through its filters and then rejecting the undesired frequencies. This prevents the undesired frequencies from reaching the antenna and allows the desired frequencies to reach the antenna without any interference.The SD25-0836R9UBQ1 consists of two filters which are made up of capacitors and inductors. The first filter is designed to pass the desired 2.4GHz ISM and Wi-Fi band frequencies while rejecting all other frequencies. The second filter is designed to pass the 2.4GHz ISM frequency while blocking all other frequencies which are not in the 2.4GHz ISM band. This ensures that only the desired frequencies reach the antenna and all other frequencies are blocked.The SD25-0836R9UBQ1 is designed to have a low insertion loss and high out of band rejection. This ensures that the desired frequencies pass through with minimal loss and the undesired frequencies are blocked. The SD25-0836R9UBQ1 is also designed to be easy to install and requires no tuning or adjustment for optimal performance.In conclusion, the SD25-0836R9UBQ1 is a type of RF Diplexer which is suitable for Wi-Fi, 2.4GHz ISM, Bluetooth, and GPS applications. It is designed to pass the desired frequencies while rejecting all other frequencies. The SD25-0836R9UBQ1 is designed to have a low insertion loss and high out of band rejection, and is easy to install and requires no tuning or adjustment for optimal performance.

The specific data is subject to PDF, and the above content is for reference