SD25-1732R9UBA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Diplexers are communication devices that use frequency multiplexing as their main technique to provide communication paths that employ multiple radio bands to send and receive data. This is accomplished through the use of specialized components that can channel different frequencies through distinct transmission paths. The SD25-1732R9UBA1 is a model of RF Diplexer designed to transmit and receive frequencies in the range of 2.4GHz to 6GHz. It has a peak power of 8W, along with a Return Loss (RL) of 37dBm.

The design and operation of the SD25-1732R9UBA1 are based mainly on the principles of transmission-line termination and selective filtering. Let us analyze these two aspects in turn.

Transmission Line Termination

A transmission line is essentially a cable that, using electronic components, allows the transmission and reception of a certain signal. Generally, the cable has two current carriers, one of which is the source which transmits the signal, and the other is the load or receiver. Usually, the load is of higher impedance than the source, and in order to ensure the proper transfer of energy from the source to the load, a termination element is needed.

The SD25-1732R9UBA1 employs a Wilkinson power divider to achieve the necessary termination. This divider functions by splitting the incoming transmission power between the two transmission cables, resulting in the creation of two equal and opposite reflections. As these reflections arrive at the termination point, they cancel each other out, thus terminating the transmission line effectively.

Selective Filtering

Following the transmission line termination procedure, the signal is passed through a selection or tuning filter that allows only signals within a certain frequency range to be passed through. The SD25-1732R9UBA1 utilizes a High Pass Low Pass (HP/LP) filter architecture, which specializes in providing a Signal-to-Noise Ratio (SNR) of up to 85dB. The filters have been optimized to have an IP3 of +13.5dBm and rejection of at least 43dBm.

The HP/LP filters are designed to specialize in the transmission of signals between 2.4 GHz and 6 GHz. This allows the SD25-1732R9UBA1 to deliver the required performance in challenging environments, while also providing improved attenuation characteristics. Moreover, the filters have beendesigned to ensure the characteristics remain stable across different temperature ranges and environmental factors.

Application Field and Working Principle

The SD25-1732R9UBA1 is primarily used in military and aerospace applications. Its RL of 37dBm, a peak power of 8W and an improved SNR of 85dB means that it is ideal for applications involving ground surveillance, target acquisition, and recognition systems. Additionally, it is also suitable for civil applications such as remote sensing and telemetry systems.

To summarize, the SD25-1732R9UBA1 is a versatile RF Diplexer that features a combination of transmission line termination and selective filtering. Through the use of Wilkinson-style dividers and HP/LP filters, it is able to provide superior performance in a variety of applications. Its robust and reliable design ensures that it can withstand extreme environmental conditions and operate under demanding conditions. All of these factors make the SD25-1732R9UBA1 an ideal choice for use in military and aerospace applications.

The specific data is subject to PDF, and the above content is for reference