SE50PAJHM3/I

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SE50PAJHM3/I is a kind of single, rectified diode that can be found in the electronics industry today. In the modern world, this kind of diode is used in applications such as DC-DC converters, rectification, motor drives and in power electronic circuits. This diode has many different uses, but it is mostly used in either an AC or DC circuit.

The SE50PAJHM3/I is an unidirectional diode, meaning it only allows current to flow in one direction. This characteristic is what makes it useful for most applications. It also has an average rectified forward current of 50 amperes and a reverse leakage current of 10 milliamperes at 25° C. The output voltage of the diode is around 12 to 16 volts, depending on the input voltage.

The diode is designed to be used in microelectronic integrated circuits, and its structure consists of a Schottky barrier in between two silicon diodes. This Schottky barrier allows the diode to perform with lower noise levels and higher efficiency than other rectified diodes. It also has a high reverse voltage rating of up to 200 volts, and its forward voltage drop is only 0.9 volts at 1 ampere of forward current.

The SE50PAJHM3/I is most commonly used in applications where an AC-powered device needs to be converted to a DC power source, or vice versa. This diode is also used in motor drives, switched-mode power supplies, DC flyback converters, and other power electronic circuits. It can be used to rectify alternating current into direct current, as well as to rectify DC into AC.

The working principle of the SE50PAJHM3/I works very similarly to other rectified diodes. When an AC voltage is applied to the diode, the Schottky barrier will block the reverse current while allowing the forward current to pass through. This forward current is then rectified into direct current. On the other hand, when a DC voltage is applied to the diode, the Schottky barrier will block the forward current while allowing the reverse current to pass through. This reverse current is then rectified into alternating current.

Overall, the SE50PAJHM3/I single rectified diode is a highly useful and efficient component for many applications in the electronics industry. It has a high reverse voltage rating, low noise levels and a low forward voltage drop. This makes it especially useful for DC-DC conversion, rectification, and motor drive applications.

The specific data is subject to PDF, and the above content is for reference