SF2002GHC0G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are a type of two-terminal electrical component that, owing to their unique construction, allow current to flow in one direction and block or ‘rectify’ current flowing in the other direction. They are typically constructed from semiconductor material and can be used for a wide range of different applications, from general purpose rectification to photovoltaic systems.

Most commonly, diodes are classified according to their voltage rating, current capability and construction. Single diodes, as the name suggests, are usually constructed from a single element or layer, and come in many different shapes, sizes and ratings. The SF2002GHC0G is a type of single diode, optimised for use in low-current, high-frequency applications.

The SF2002GHC0G is a low-cost, low-power diode constructed from a single layer of silicon, with a rated voltage of 250 Volts. It has a forward current of 2 Amps, and in its reverse current state is able to block up to 1.5 Amps. With regards to its power dissipation, the part has a rating of 0.75 Watts.

Furthermore, the SF2002GHC0G has a high temperature operating range of -55°C to 125°C, and can operate at high frequencies (up to 15 MHz) with no significant loss in performance. Its low current and power levels make it an ideal choice for applications such as rectifying DC/AC power and motor control circuits.

The working principle behind the SF2002GHC0G is relatively simple. When a voltage is applied across the diode’s terminals, a current flow is induced due to the difference in potential between the terminals. However, when the polarity is reversed the diode will not allow current to flow, effectively blocking it due to the junction barrier created by the difference in material.

This action allows the SF2002GHC0G to passively rectify, or in other words convert an alternating current (AC) input into a unidirectional flow. This has many uses, such as in power supplies, DC/DC converters, voltage regulators, and in radio antenna circuits, where the diode serves to prevent the flow of radio frequency (RF) energy into the power supply.

In summary, the SF2002GHC0G is a single diode referenced as belonging to the diode-rectifier category. It is designed for use with low current and high frequency applications, and is characterised by a rated voltage of 250 Volts, a forward current rating of 2 Amps and a reverse current blocking of 1.5 Amps. Its wide temperature range, high frequency operation and low power levels make it an ideal choice for many circuit applications that have challenges in the rectification of AC signals.

The specific data is subject to PDF, and the above content is for reference