SF25GHB0G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes – Rectifiers – Single are commonplace components used in the majority of basic electrical and electronic circuits. Among which, SF25GHB0G is a single-pole, single-throw NPN semiconductor device, with a darlington substrate design featuring a breakdown voltage of 150V. This device is a general-purpose, low-frequency rectifier used to convert alternating current (AC) to direct current (DC).

An important application area of SF25GHB0G is power supply design, especially in the case of DC-DC converters. These circuits are used to convert a fixed DC voltage, such as the voltage from a battery or mains electricity supply, into any other desired voltage. With the help of SF25GHB0G in the power supply circuit, the transformer steps down the AC voltage to a low DC voltage, and then rectifies that voltage to a sinusoidal form before the regulator and filter circuit changes the current to a stabilized DC voltage.

Another widely-used application area of SF25GHB0G is in motor drives. Motors naturally accept alternating current, however, SF25GHB0G play an important role in controlling the current and voltage for these motors. By plugging in motor controllers and other motor control circuits, SF25GHB0G can effectively control the current and voltage from a DC power supply, and provide an efficient solution for engine control operations in various applications.

In terms of its working principle, SF25GHB0G primarily consists of N-type and P-type diodes connected in series. An N-type diode is a PN junction silicon diode that operates in the forward direction, allowing current to flow in the direction of the arrow on the package. Inversely, a P-type diode works in the reverse bias direction and is used to prevent current flowing in the opposite direction as the arrow on the package. When a voltage is applied across these PN junctions during the positive half cycle of the input AC waveform, the P-type diodes are cut-off and the N-type is turned-on and conduction current is allowed to flow in one direction.

At the same time, during the other negative half cycle, the operation is reversed, and the P-type diode is cut-on, allowing current to flow in the reverse direction, thus enabling SF25GHB0G to successfully convert the AC current to a DC current. Moreover, two of these diodes connected in series can be used for a full-wave bridge rectifier, providing higher conversion efficiency and smoother current flow, by allowing current to flow in both positive and negative half cycles.

In summary, the rectifying performance of SF25GHB0G is above expectation, due to the high breakdown voltage of 150V, making it an essential component in modern day circuits. As such, it is frequently used in power supply designs and motor drive circuits, providing an effective solution for power regulation.

The specific data is subject to PDF, and the above content is for reference