SJ6006VS2TP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are electronic components which act like switches, allowing current to flow through them when a certain voltage is applied across the two terminals. SCRs (silicon controlled rectifiers) are a type of thyristor which find applications in many areas. The application field and working principle of an SCR, the SJ6006VS2TP, will now be discussed.

The SJ6006VS2TP is a low-power SCR constructed using silicon and designed for use in AC switching applications, operating in the temperature range of -55°C to +150°C. This device is suitable for use in many industrial applications, including motor, heater, and lamp control, as well as in charger and voltage regulator circuits.

The SJ6006VS2TP consists of four layers of semiconductor material: two P-type Silicon layers and two N-type Silicon layers. At the centre of the device is the Gate, which is connected to a terminal on the device. The other two terminals, the Anode and the Cathode, are connected to the N-type and P-type layers, respectively.

When the voltage applied across the Anode and Cathode is below its breakover value (2.2V, in this case), no current flows through the device. However, when this voltage exceeds the breakover value and a small current is allowed to pass through the Gate, the device switches from a non-conducting state to a conducting state and a large current starts flowing through the device. This large current remains flowing until the voltage across the Anode and Cathode drops below a certain level.

The SJ6006VS2TP also has a device rating of 600V, with a maximum peak gate current of 0.5mA and a maximum average gate current of 0.2mA. The device also has a maximum breakover voltage of 2.2V and a maximum holding current of 8.5mA. These parameters make the SJ6006VS2TP suitable for use in many AC switching applications.

In summary, SJ6006VS2TP is an SCR suitable for use in AC switching applications, operating in the temperature range of -55°C to +150°C. It has four layers of semiconductor material, with the Gate at the centre and connected to one of the device\'s terminals. When the voltage across the Anode and Cathode exceeds the breakover value and a small current passes through the Gate, the device switches from a non-conducting state to a conducting state and a large current flows through the device until the voltage drops below a certain level. The device has a maximum peak gate current of 0.5mA and a maximum holding current of 8.5mA, making it suitable for many AC switching applications.

The specific data is subject to PDF, and the above content is for reference