SLA5059

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SLA5059 is a type of transistor, called a vertical double differential field effect transistor array (VDDFET array). It is commonly used in applications such as power amplifiers, switching regulators and lamps. Its working principle makes it a versatile device that provides flexibility while being relatively cost effective and able to tolerate high power dissipation in the form of heat.

A VDDFET array is formed by two differential pairs and connected with a current source. Each pair consists of two vertical field effect transistors (FETs), on a single substrate layer. The two FETs in each pair are connected in series, and each pair is connected to a separate current source. This arrangement allows for a high degree of compatibility among different device specifications and a wide range of design options. It also ensures a low noise floor, low power consumption and excellent thermal performance.

SLA5059 is a vertical double differential FET array that is capable of providing two single ended outputs, or two differential outputs, when operating in a ‘rectifying’ mode. When powered, the device operates in either an on-state or an off-state. In the on-state, the two FETs in the array are connected in series and form one balanced current source. This state is used for applications where a higher current is necessary, such as an amplifier or a lamp. In the off-state, the two FETs are connected in parallel and form two separate current sources. This state is used for switching or rectifying applications.

SLA5059 operates in either a linear or a switching mode. The linear operating mode is used when a high degree of linearity is required. In this mode, the FETs in the array are connected in series and the input voltage sets the gate voltage. This allows the device to operate as an amplifier or other linear device, while the output voltage is equal to the input voltage multiplied by the ratio of the number of FETs in the array. The switching operating mode is used when a high degree of switching is required. In this mode, the FETs in the array are connected in parallel, and the switch can be turned on and off in a very short period of time, allowing for switching applications.

SLA5059 is also available in several variations, depending on the number of FETs in the array and their orientation. The number of FETs can vary from four to sixteen, and can be either vertically or horizontally connected. The orientation of the FETs is determined by the nature of the application and the design of the device. Horizontally aligned FETs are faster in switching applications, while vertically aligned FETs are more suited to linear applications.

SLA5059 is an effective and versatile device that can be used in applications ranging from power amplifiers and switching regulators to lamps and rectifying applications. Its wide range of configurations, operating modes and design options make it a go to device for a wide range of applications. Its linear or switching operation mode, depending on the nature of the application, and its low noise floor, low power consumption, and excellent thermal performance make it suitable for a variety of uses.

The specific data is subject to PDF, and the above content is for reference