SMG10VB153M18X35LL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are commonly used in a wide range of applications due to their relatively small size and low production cost. The SMG10VB153M18X35LL is an aluminum electrolytic capacitor that is designed to meet high performance requirements. It is typically used in power management circuits, signal decoupling, and other applications requiring high-performance capacitance. Additionally, the SMG10VB153M18X35LL is often utilized in sensitive equipment such as programmable logic controllers (PLCs) and medical devices.

Construction and Terminology

The SMG10VB153M18X35LL is an axial aluminum electrolytic capacitor with screw terminal leads. It has a minimum rated capacitance of 15 µF, a maximum rated voltage of 50 volts, and an operating temperature range of -40°C to +85°C. Its body size is 6.3 x 15.3mm. The SMG10VB153M18X35LL\'s axial leads extend out of the two opposite ends of its cylindrical body. The anode and cathode are separated by a thin insulating oxide film, through which current can travel when the capacitor is charged up. The anode is the terminal near the positive sign on the capacitor’s body labeling, while the cathode is the terminal near the negative sign. The anode can also be identified by its extended length and the existence of a rubber seal beyond the end of the terminal.

Principle of Operation

An aluminum electrolytic capacitor is composed of an aluminum foil anode that is rolled up to form a spiral shape and covered in an electrolyte material. This structure helps to increase the surface area. A layer of electrolyte material covers the top and bottom of the anode roll, and a layer of oxide film acts as a dielectric between the anode and the cathode. When a voltage is applied, ions move from the anode to the cathode through the electrolyte, allowing current to flow. This process is known as Faraday\'s Law, and explains the capacitance of the SMG10VB153M18X35LL. The capacitance of an aluminum electrolytic capacitor depends on two factors: the area of the capacitor\'s electrodes and the thickness of the dielectric, or oxide film.

Applications

The SMG10VB153M18X35LL aluminum electrolytic capacitor is suitable for a variety of applications, both analog and digital. Its compact size makes it an ideal choice for power management circuits, such as those in PLCs. Additionally, it can be used in DC/DC converters, switch-mode power supplies (SMPS), and automotive power supplies. Signal decoupling is another application for which the SMG10VB153M18X35LL is well suited. The device can be used in analog signal paths to reduce the signal-to-noise ratio by filtering high-frequency components. Additionally, it can be used for high-speed timing circuits, where it can act as a delay line.

Conclusion

The SMG10VB153M18X35LL aluminum electrolytic capacitor is a versatile component that can be used for a variety of applications, including power management circuits, signal decoupling, and high-speed timing circuits. Its compact size and wide operating temperature range make it suitable for use in sensitive equipment, including PLCs and medical devices.

The specific data is subject to PDF, and the above content is for reference