SN75DP119RGYT

Number of Channels:	2
Base Part Number:	75DP119
Supplier Device Package:	14-VQFN (3.5x3.5)
Package / Case:	14-VFQFN Exposed Pad
Operating Temperature:	0°C ~ 85°C
Current - Supply:	24.9mA
Voltage - Supply:	3 V ~ 3.6 V
Signal Conditioning:	Input Equalization, Output Pre-Emphasis
Delay Time:	325ps
Series:	--
Data Rate (Max):	2.7Gbps
Output:	DisplayPort
Input:	DisplayPort
Applications:	DisplayPort
Type:	Buffer, ReDriver
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN75DP119RGYT is an interface component of a signal buffer, repeater, splitter. It is designed to transmit data and control signals, and can provide reliable communications between different systems and devices. The component can also be used to extend data transmission distances on digital buses. As such, it is suitable for industrial, automotive, and medical applications.The SN75DP119RGYT is a fully integrated component that offers low emission, high speed capability, and a small area footprint. It is rated for high operating temperature, and can be easily and quickly installed in a circuit design. The component is also configured for two-wire and four-wire serial data transmission, and offers a full range of features including data rate selection, data rate coding, error detection and correction, data recovery, and auto-handshake of data.The SN75DP119RGYT is made of a high-efficiency power switch, which will limit or reduce current consumption during idle periods. This enables the device to conserve energy, which leads to improved efficiency.The SN75DP119RGYT offers excellent synchronous demux and mux operation. It supports a high-speed serial data rate of up to 10 Mbps and has a high noise immunity. The component has various application options that enable it to pass data in both directions, as well as to bridge data from one point to another.The working principle of the SN75DP119RGYT is based on the repetition of signals. The device has two power rails that provide power to the differential lines, enabling it to differentiate between digital signals from the two power rails. The device then takes the digital signals from one power rail and transmits it to the other power rail. This process is repeated until the signals reach the destination.The SN75DP119RGYT is capable of transmitting data at rates up to 10 Mbps, depending on the data rate chosen. The serial data encoding used is a four-bit Gray code with two bits for the two power rails. This four-bit Gray code ensures that the data is correctly transmitted between the source and the destination, even when the power supply is temporarily interrupted.In summary, the SN75DP119RGYT is an interface component of a signal buffer, repeater, and splitter designed to transmit data and control signals. It operates on two power rails to pass data back and forth between different systems and devices at rates up to 10 Mbps. The device uses a four-bit Gray code to ensure data reliability, even in the event of power interruptions. As such, it is suitable for a wide range of applications, including industrial, automotive, and medical applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description