Allicdata Part #: | SP310EEP-L-ND |
Manufacturer Part#: |
SP310EEP-L |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | MaxLinear, Inc. |
Short Description: | IC DVR/RCVR RS232 5V SGL 18DIP |
More Detail: | 2/2 Transceiver Full RS232 18-PDIP |
DataSheet: | SP310EEP-L Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tube |
Part Status: | Obsolete |
Type: | Transceiver |
Protocol: | RS232 |
Number of Drivers/Receivers: | 2/2 |
Duplex: | Full |
Receiver Hysteresis: | 500mV |
Data Rate: | 240kbps |
Voltage - Supply: | 4.5 V ~ 5.5 V |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Through Hole |
Package / Case: | 18-DIP (0.300", 7.62mm) |
Supplier Device Package: | 18-PDIP |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The SP310EEP-L is an optocoupler interface chip that facilitates data communication between a microcontroller and an external component. This three-stage optocoupler system provides a cost-effective solution to long-distance data transfer and communications between processing units.
SP310EEP-L is a low-cost, low-power tri-state driver that has the advantage of providing a high-efficiency, low-noise and high-sensitivity interface circuit for two-way data transfer. It is designed with a high-signed noise immunity, and its low power consumption reduces power consumption while providing a wide range of communication speeds.
The SP310EEP-L provides an optocoupler interface by generating a current pulse, which acts as a bridge between the microcontroller and the external component. The optocoupler consists of two parts: a light source and a photo-detector. The light source is typically a light emitting diode (LED) that produces a light wave that is received by the photo-detector, which consists of photosensitive diodes. When the light wave is received by the photo-detector, it produces a digital signal that is sent back to the microcontroller.
The SP310EEP-L converts the output of the microcontroller into a 4.2V to 16V electrical current pulse. The light source of the optocoupler is then triggered by the current pulse and produces a light wave which is then detected by the photo-detector. The data is then sent back to the microcontroller, as an analog or digital signal depending on the data format used.
The SP310EEP-L is suitable for applications that require long-distance communication or data transfer, high-speed data processing, or where data security and reliability are of paramount importance. The on-board 3.3V regulator enables steady operation in varying supply voltage environments. Its external components can be used to adjust the current pulse range and its asynchronous or synchronous operation.
The SP310EEP-L’s operation uses two signals: an enable/disable (EN) and an oscillator (OSC). The EN is used to switch the optocoupler driver between its high impedance state, allowing for low power consumption, and its active state, where it produces a current pulse. The OSC is used to select the frequency of the current pulse which is generated by the optocoupler.
The SP310EEP-L provides a robust and reliable two-way data transfer interface for applications such as industrial automation and control, medical, home and office automation, transportation, automotive and military. In addition, it is also well suited for high-speed applications, making it an ideal choice for a variety of industrial, communication and automotive applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SP3118-01ETG | Littelfuse I... | -- | 1000 | TVS DIODE 18V 38V SOD882 |
SP3145-01WTG | Littelfuse I... | 0.06 $ | 1000 | TVS DIODE 3.3V 11.5V 0100... |
SP3130-01WTG | Littelfuse I... | -- | 20000 | TVS DIODE 28V 48V 0201 FL... |
SP3118-01WTG | Littelfuse I... | -- | 10000 | TVS DIODE 18V 38V 0201 FL... |
SP3130-01ETG | Littelfuse I... | -- | 1000 | TVS DIODE 28V 48V SOD882 |
SP317V2-L/TR | MaxLinear, I... | 0.0 $ | 1000 | IC REG LINEAR POS ADJ 1A ... |
SP310ACT-L | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 ESD 18S... |
SP310ECP-L | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 ESD 18D... |
SP310EET-L | MaxLinear, I... | -- | 1000 | IC DVR/RCVR RS232 ESD 18S... |
SP312ACT-L | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 5V SGL ... |
SP312EET-L | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 ESD 18S... |
SP310ACP-L | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 5V SGL ... |
SP310ACT-L/TR | MaxLinear, I... | -- | 1000 | IC DVR/RCVR RS232 5V SGL ... |
SP310AET-L | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 5V SGL ... |
SP310AET-L/TR | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 5V SGL ... |
SP310ECT-L | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 5V SGL ... |
SP310ECT-L/TR | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 5V SGL ... |
SP310EEP-L | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 5V SGL ... |
SP310EET-L/TR | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 5V SGL ... |
SP312ACT-L/TR | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 5V SGL ... |
SP312AET-L | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 5V SGL ... |
SP312AET-L/TR | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 5V SGL ... |
SP312ECT-L | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 5V SGL ... |
SP312ECT-L/TR | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 5V SGL ... |
SP312EET-L/TR | MaxLinear, I... | 0.0 $ | 1000 | IC DVR/RCVR RS232 5V SGL ... |
IC transceiver Automotive Local Intercon...
LIN Transceiver Automotive System Basis ...
IC TRANSCEIVER 1/1 8SOIC,AEC-Q100
IC TXRX MULTIRATE 16BIT 208-BGA1/1 Trans...
IC TXRX CAN HS 5.25V 8-SOIC1/1 Transceiv...
IC CAN TRANSCEIVER HS 8-SOIC1/1 Transcei...