SP312ECT-L/TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SP312ECT-L/TR is a part of a series of interface drivers, receivers, transceivers and other devices required for high-speed data networking, designed and manufactured by Exar Corporation. This device is designed with a wide range of applications including symmetric communication using RS485, RS422 or Low-Voltage Differential Signaling (LVDS) protocols.

In order to understand the SP312ECT-L/TR, its application field and working principle needs to be considered. SP312ECT-L/TR is capable of performing high-speed point-to-point bidirectional communication. Its wide working voltage range of 1.5V to 5.5V from a single +1.8V supply allows for reliable data transmission in mobile equipment with minimal power consumption. SP312ECT-L/TR supports several data rates of up to 100 Mbps. It also works in hot swap and hot plug conditions, which make it ideal for mobile applications.

The SP312ECT-L/TR is designed to support two types of data transmission; symmetric and differential. Asymmetric communication is used in the traditional RS-485 serial protocol, sending data within only one communication line. On the other hand, the differential protocol uses two lines which send the same data, but this time with opposite polarity. This second option is more reliable for long distance transmission, though more lines means additional cost.

To construct a reliable communication, the SP312ECT-L/TR also works at the physical level and can implement various physical layer features like adaptive synchronization, carrier detect and clock recover. Adaptive synchronization allows the device to detect certain data patterns and modify the sampling rate accordingly. This feature is highly useful to monitor a changing data stream while the two ends of the interface are always synchronized. Carrier detect in this device is used to verify the connection status between two communicating devices and the clock recover is used to detect the external clock frequency of the data stream.

In order to reduce power consumption, the device also supports two power saving modes that enable different types of sleep modes to operate. This is especially useful in applications that use wireless or wired data transmission. Finally, the device supports a critical feature to prevent data corruption because of electromagnetic interference; the line fail detect feature.

To sum up, the SP312ECT-L/TR is a driver, receiver, transceiver, and other interface device intended for high-speed point-to-point communication. It supports both symmetric and differential communication and comes with a wide range of features, including electronic noise protection, power saving modes and adaptive synchronization. Therefore, this device is ideal for mobile applications and increases the reliability of data transmission over long distances.

The specific data is subject to PDF, and the above content is for reference