ST16C552ACJ68-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ST16C552ACJ68-F is a universal asynchronous receiver and transmitter (UART) interface device used in many applications. This device provides a full-duplex synchronous communication link between data processing or transmission devices. It features a five-line serial interface that can be operated as either a complete or partial duplex A/B port.

The device is used in applications including: general purpose digital signal processing, network interface controllers such as Ethernet, serial I/O control link communication, and remote terminal control.

The ST16C552ACJ68-F is based on a standard implementation of the UART protocol. It features a five-line serial interface that enables communication between two or more serial devices. This interface consists of five lines including transmit, receive, clock, reset, and interrupt. The ST16C552ACJ68-F can be operated in either a full-duplex or half-duplex mode. In full-duplex mode, data is transmitted and received simultaneously on the same channel. In half-duplex mode, data is transmitted and received on alternating channels.

The ST16C552ACJ68-F supports data rates of up to 115.2 Kbps. It can be programmed to operate in either 8-bit or 9-bit mode. The device provides a 32-byte deep FIFO (First-In-First-Out) buffer for each of its receive and transmit channels, which allows for efficient data storage and transmission. It also features an on-chip baud-rate generator and programmable parity check for data integrity.

The ST16C552ACJ68-F supports various modes of operation. It can be programmed to act as a general purpose UART or as an infrared link serial port for wireless infrared communications. It allows for both hardware and software flow control with either the XON/XOFF characters or the RTS/CTS (Request to Send/Clear to Send) lines. The device also supports a variety of I/O modes including 8-bit, 9-bit, and hardware handshake. Additionally, the ST16C552ACJ68-F supports multiple communications protocols including asynchronous, bit-bang, and multi-protocol modes.

The ST16C552ACJ68-F operates between a supply voltage range of +5V and +5.5V. It is available in 20-pin PDIP, 28-pin SOIC, and 40-pin SSOP packages.

In conclusion, the ST16C552ACJ68-F is a universal asynchronous receiver and transmitter (UART) device commonly used in many applications. It features a five-line serial interface and supports data rates of up to 115.2 Kbps. The device offers a 32-byte deep FIFO (First-In-First-Out) buffer and supports various modes of operation. It is available in 20-pin PDIP, 28-pin SOIC, and 40-pin SSOP packages.

The specific data is subject to PDF, and the above content is for reference