STK22C48-NF45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The STK22C48-NF45 is a memory device classified under the category of small outline 8 pin integrated circuit (SOIC-8) designed to provide high performance, low power and small footprint solutions for a wide range of applications.

The STK22C48-NF45 is based upon a 16Kbit non-volatile memory with a two-wire interface that provides full-duplex communications via a master device, such as a microcontroller, and is supported by a Hardware Write Protection Scheme (HWP).

The STK22C48-NF45 has three availablewrite cycles (WR, SST and SST-2). The WR cycle is used for general write operations and the SST cycle is used for faster write operations. The SST-2 cycle is used for write operations only but with a slightly different write pattern than the WR and SST cycles. All of these cycles can be accessed through the master device interface.

The STK22C48-NF45 consists of two memory areas: a 200-byte main memory and a 128-byte protected memory area. Data can be written and read from both areas, but the protected area is protected by hardware write protection that is enabled on the master device interface. The protected area can be used to maintain data when the power is off, as it is a non-volatile memory.

The STK22C48-NF45 is intended for a variety of applications, ranging from data logging and storage to remote control and display devices. It is an ideal choice for applications such as motor control, security systems, and home appliances, as it provides an affordable, non-volatile storage solution.

The STK22C48-NF45 is based on the principle of a two-wire interface. This two-wire interface consists of two wires: an SDA line that is used for bidirectional data transfer, and an SCK line that is used to synchronize the data transfer between the master and the memory device. The SDA line is used to carry the commands and data that are sent from the master to the memory device, while the SCK line is used to initiate and acknowledge the data transfers.

The STK22C48-NF45 is designed to operate at a maximum clock frequency of 200kHz. The speed of communication is dependent on the power supply voltage and the temperature. As the power supply voltage decreases, the communication speed is also decreased. The temperature of the device should also be considered during operation as the communication speed is affected by temperature changes.

The STK22C48-NF45 memory device is a low cost, low power and highly reliable solution for many applications, and it can be used in environments with a wide range of temperatures. It provides a reliable data storage solution that is ideal for applications such as motor control, security systems, and home appliances.

The specific data is subject to PDF, and the above content is for reference