SZBZX84C68LT1G

The SZBZX84C68LT1G is a single zener diode with an operating voltage of 15V and a current rating of 200mW. The device is constructed using an Array Planar Technology process and is conformally coated in a package that is designed to fit a variety of circuit board footprints. The component has been designed for use in low power and battery operated electronic circuits, as well as automotive applications such as over voltage protection.

The SZBZX84C68LT1G is a specialized diode that is used for regulating or protecting a circuit from overvoltage. The device operates by allowing current to flow in one direction, while not allowing it to flow in the other direction until the breakdown voltage is reached. When the breakdown voltage is exceeded, the diodepasses current in both directions and provides a degree of protection for the components that are connected to it.

The SZBZX84C68LT1G operates by allowing a small amount of current to flow in the forward direction until the breakdown voltage is reached. At this point, reverse bias is created in the diode which causes a sharp increase in the reverse leakage current. This increase in current allows the diode to act as a regulator, and prevents overvoltages from damaging the connected circuit. The device is designed to be surface mounted to a circuit board, and has a maximum working voltage of 20V and a maximum working current of 10mA.

In order for the SZBZX84C68LT1G to operate correctly, it must be connected to the correct power supply. The device is designed to work with a dc power supply, and should not be connected to an ac power supply. Additionally, the polarity of the power supply must be correct. The diode should be placed reverse-biased, meaning that the anode should be connected to the negative terminal of the power supply and the cathode should be connected to the positive terminal.

The device is typically used in electronics circuits, such as audio amplifiers, radio receivers and transmitters, and computers, as well as automotive applications. When used in automotive applications, the diode can be used to protect the circuit from surges due to alternator charging, voltage spikes from an external power source, or from short-circuit conditions. The SZBZX84C68LT1G is also used in low power circuits, where the device can act as a voltage regulator, providing a stable voltage to the components connected to it.

In conclusion, the SZBZX84C68LT1G is an important component for a variety of electronic and automotive applications. The diode is designed to protect circuits from overvoltage conditions, and can provide a stable voltage in low power circuits. When connected to the correct power supply, the device can provide efficient and reliable circuit protection.