TCET1104G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, or optocouplers, are electronic devices that use a light-emitting diode (LED) to isolate two circuits electrically. The TCET1104G is a transistor-photovoltaic optocoupler isolator that contains a built-in transistor and a photosensitive device. It is specifically designed for applications including power supplies, signal level isolators, and isolated signal transducers.

The TCET1104G has two main components -- a light emitting diode and a photosensitive transistor. The LED is the light source that emits photons when an electrical current is passed through it. The photons then travel through an isolating medium to a photosensitive device. This device is a transistor, which generates a current proportionally to the number of photons it detects.

The power supply of the TCET1104G is typically supplied through a bridge rectifier circuit. This voltage is then isolated from the input ground by a transformer, preventing any unwanted electrical noise or interference from entering the circuit. The incoming voltage is regulated and then applied to the LED which emits photons accordingly. The photons are emitted across the isolator to the phototransistor, which converts the light into a proportional current.

The transistor within the TCET1104G can provide either an open collector output or a push-pull output depending on the application. In an open collector, the transistor pairs with an additional transistor connected to a load, acting as a switch for controlling the current. For a push-pull output, the transistor acts as an amplifier and boosts the signals into the load. This can be used for AC or DC applications.

The TCET1104G optoisolator is a versatile component that can be used for a variety of applications. It is commonly used in data transmission, industrial control, and power control systems. It can also be used in switch-mode DC-DC converters and controlled motor drives. The device is designed to serve as an interface between two circuits, and is suitable for use in high electromagnetic interference (EMI) environments.

In summary, the TCET1104G optocoupler is a reliable and cost-effective isolator with a variety of applications. Its built-in transistor and photosensitive device allow for versatile signal level isolations and can be used in a variety of power supply, signal level isolations, and isolated signal transducer applications. The device is designed to provide isolation up to 10 kV/µs and is designed for use in high EMI environments. The device is ultimately suited for providing electrical noise free signals and isolation between interconnected circuits.

The specific data is subject to PDF, and the above content is for reference