TLC2543QDWREP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data acquisition is the process of collecting, measuring and monitoring physical quantities from the environment and converting them into digital values for further analysis. A Data Acquisition System (DAS) serves this purpose by providing a combination of hardware and software designed to measure, condition and acquire physical signals. One commonly used type of data acquisition device is the Analog to Digital Converter (ADC), which is used to convert an analog value – such as an electrical signal – into a digital value. The TLC2543QDWREP is a high-speed, high-performance successive-approximation-register (SAR) ADC designed for low-power and low-voltage applications.

The TLC2543QDWREP is a 12-bit ADC capable of digitizing input signals with a maximum input voltage of 7V and a maximum sampling frequency of 135Msps. It is available in a 9-pin QFN and a 10-pin SSOP package, which makes it suitable for a wide range of applications. The device features an on-chip voltage reference, allowing for adjustable gain and offset settings, and has an internal temperature sensor for monitoring the device temperature and compensating for thermal drift. The device also has a programmable FIFO and a scan mode for multiplexed applications.

The TLC2543QDWREP is an ideal ADC for battery-powered and small form-factor designs, as it can operate on a single 1.7V to 3.6V supply with a current consumption of only 4.7mA. This makes it ideal for applications where size and power consumption are critical factors, such as portable medical devices, scopes, and data loggers.

The TLC2543QDWREP can be used to digitize input signals from a variety of sensors and transducers, such as temperature, pressure, light or sound sensors. The device is also well suited for applications that require high-speed data conversion, such as communications and signal processing. Additionally, the scan mode allows for multiplexing multiple sensors onto a single ADC, making the TLC2543QDWREP suitable for multiplexed measurement applications.

The TLC2543QDWREP operates on a successive approximation register (SAR) architecture, which is used to digitize input signals by applying successive small incremental changes to the output until the output is within a required accuracy of the desired input. This architecture enables a high conversion speed and low power consumption. Additionally, the device features a low current shutdown mode, so that the current consumption is minimized when the unit is not in use.

In summary, the TLC2543QDWREP is a high-speed, low power ADC suited for battery-powered and small form-factor applications. The device has a wide input range, programmable FIFO, on-chip voltage reference and temperature sensing, and scan mode to support multiplexed applications. Its SAR architecture enables fast and accurate data conversion while consuming minimal power.

The specific data is subject to PDF, and the above content is for reference