TLZ2V4A-GS18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TLZ2V4A-GS18 is a type of Zener diode, which is classified in the broad category of diodes. This type of diode is part of the large family of semiconductor devices that uses a junction between two different conductors. This juncture allows current to pass from the anode to the cathode, in one direction only, due to the presence of very thin layers of material between them, which allow for the flow of electrons in one direction only.

A Zener diode is a type of diode that allows electrons to flow both in the forward and reverse direction when the voltage across it is reversed. This effect is referred to as the zener breakdown and occurs when the voltage applied across the junction is large enough to cause electrons to tunnel through the thin insulating layers present in the junction, thus allowing the current to freely pass in reverse direction. The TLZ2V4A-GS18 is a single Zener diode, which means that it only involves a single circuit component. The TLZ2V4A-GS18 is available with a reverse breakdown voltage of 2.4V, with a range of tolerances available for applications requiring precise voltage differences. The package for the TLZ2V4A-GS18 diode is a small 2-pin SOT-23 package, allowing for use in smaller, space-constrained applications.

The TLZ2V4A-GS18 can be used in many applications, such as voltage regulation, power supply and low power overvoltage protection circuits. It is a favorite for many designers in these applications due to its low capacitance, very low leakage current, and low power and voltage ratings. The diode can also be used in audio equipment as a negative supply regulator, reducing the distortion and noise produced during zener breakdown, making it an ideal candidate for use in sensitive audio applications requiring low noise levels.

The working principle of the TLZ2V4A-GS18 is relatively simple. When the voltage across it increases beyond the breakdown voltage, electrons tunnel through the junction, allowing current to flow in the reverse direction. During the zener breakdown, a large amount of current can flow, making it ideal for voltage regulation and power supply applications. The zener breakdown occurs until the current is limited by an external current source. The external current source then makes sure that the voltage across the diode does not exceed the breakdown voltage, thus allowing for stable and consistent voltage regulation.

The TLZ2V4A-GS18 is thus a widely used Zener diode due to its low capacitance and very low leakage current, allowing for its use in a variety of applications. Its 2.4V cutoff voltage makes it an excellent choice for voltage regulation, power supply and low power over-voltage protection circuits, as well as for audio equipment. Its small 2-pin SOT-23 package is ideal for applications where space-constraints are an issue, such as in portable electronics. Furthermore, its working principle of zener breakdown is relatively simple, allowing designers to easily utilize it in their projects.

The specific data is subject to PDF, and the above content is for reference