TPD2F702YFKR Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI filters are made of LC (inductance-capacitance) or RC (resistance-capacitance) networks depending on the particular application and requirements. The TPD2F702YFKR is a two-stage EMI/RFI filter for use with two-wire power supply, low-voltage signals and/or trace lines. It is designed to reduce or eliminate interference from electromagnetic pulse, electrostatic discharge (ESD), or other high-frequency signals.

The TPD2F702YFKR is primarily used in automotive and industrial applications such as devices connected to vehicles. It can also be used in any kind of environment where electrical noise is a serious issue, such as medical or military applications. Additionally, it is ideal for use in consumer electronic devices, as well as for analog and digital data exchange.

The filter contains two stages that each operate as a single-pole high-pass filter with an internal capacitor. The built-in capacitor is used to block any DC signal as well as frequencies below the cutoff frequency (as defined by the LC/RC ratio) while allowing frequencies above the cutoff frequency to pass. This allows the electronics to be protected from noise sources, which can potentially disrupt the functionality and performance of the device.

The TPD2F702YFKR also boasts an efficient high-frequency rejection rate, making it ideal for use in environments where high-frequency signals are prevalent. The filter also has a fast response time, making it suitable for applications where fast signal response is required. Additionally, the filter is FCC, CISPR25 Type 4 and EN55032 certified for compliance with global EMI/RFI regulations.

Overall, the TPD2F702YFKR filter is a reliable and efficient EMI/RFI filter that is suitable for use in a wide variety of applications. It provides effective protection from EMI/RFI interference while also boasting a high rejection rate for high-frequency signals. Its fast response time is also beneficial in applications where fast signal response is critical. Additionally, the filter is FCC, CISPR25 Type 4 and EN55032 certified to ensure compliance with EMI/RFI regulations.

The specific data is subject to PDF, and the above content is for reference