TPS562210AEVM-663

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TPS562210AEVM-663 evaluation board (EB) is a versatile tool designed for easily evaluating the TPS562210A SMPS controller in an off-line, isolated DC/DC converter application. The EB has many features that make it an excellent tool for debugging and optimizing the TPS562210A application. This article will discuss the application field and working principle of the TPS562210AEVM-663.

The TPS562210AEVM-663 provides two voltage outputs (VOUT1 and VOUT2) that are individually adjustable for a variety of applications. The output voltages are selectable, and can be adjusted using onboard potentiometers or by means of an external voltage reference. The EB has a wide input voltage range. It can operate from 90Vac to 150Vac, and its input voltage range can be increased with the addition of an external resistor. The board also offers a built-in EMC filter for better noise immunity.

The TPS562210AEVM-663 can be used for a variety of applications, including isolated and non-isolated DC/DC converters, battery charging applications, LED lighting applications, and many others. It is also suitable for automotive applications, such as powering electronic components in a vehicle. With its wide input voltage range and adjustable output voltages, the EB is able to accommodate different types of power supplies and power loads. Additionally, the evaluation board can be used to evaluate various features of the TPS562210A integrated circuit, such as input protection circuitry, soft start, overvoltage protection, and more.

The TPS562210AEVM-663 board is designed to operate in both the continuous conduction mode (CCM) and the discontinuous conduction mode (DCM). The board features a built-in continuous mode current limit (CML) circuit and an adjustable DCM peak current limit (PCL) circuit. The PWMin and PWMax controls are provided to adjust the minimum and maximum duty cycle of the TPS562210A for use in CCM applications. The CML can be used to limit the maximum output current in CCM applications, and the PCL can be used to limit the maximum peak current in DCM applications.

The TPS562210AEVM-663 evaluation board features an isolated gate driver (IGD) which is used to drive the external MOSFET switch in the primary side of the isolated DC/DC converter. The IGD provides protection against short circuit and overvoltage conditions in the system. The IGD also provides a snubber circuit to reduce high frequency noise. Additionally, the IGD has a soft start circuit to reduce inrush current at start up. The EB also has an optional MOSFET driver stage for driving the external MOSFET switch, as well as an optional linear regulator stage for powering system loads.

The TPS562210AEVM-663 has a number of features which make it an ideal tool for analyzing and debugging the performance of the TPS562210A SMPS controller in various applications. It has adjustable voltage and current parameters, optional MOSFET driver stage, optional linear regulator stage, adjustable minimum and maximum duty cycles, built-in EMC filter, isolated gate driver, and adjustable peak current limit. All of these features make it easy to optimize performance for a given application.

The TPS562210AEVM-663 evaluation board is a versatile tool for evaluating the TPS562210A in an off-line, isolated DC/DC converter application. It features adjustable voltage and current parameters, optional MOSFET driver stage, optional linear regulator stage, adjustable minimum and maximum duty cycles, built-in EMC filter, isolated gate driver, and adjustable peak current limit. With its wide range of features and adjustable parameters, the EB is an excellent tool for debugging and optimizing the TPS562210A application.

The specific data is subject to PDF, and the above content is for reference