TXS0101DBVT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic translators and level shifters are two essential categories of integrated circuits (ICs) in the digital world. Although both of them are used to change logic levels, their applications and principles are quite different. The TXS0101DBVT is one such chip that fits into both of these categories. It is a bi-directional logic level translator. This article provides an in-depth look at the application field and working principle of the TXS0101DBVT.

The TXS0101DBVT is a single-channel bidirectional logic translator. It enables communication between two devices with different supply voltages. This device is designed specifically to translate logic levels between logic families, such as LVTTL/LVCMOS to LVCMOS/LVTTL, separated by up to a 5.5V supply voltage gap. This chip is commonly used in applications that require signal level translation between different voltage systems or logic standards, such as a 3.3V system and a 5V system, or between a 2.5V low-voltage logic family and a 5V logic family.

The TXS0101DBVT has three input terminals: VCCA, VCCB, and GND. VCCA and VCCB should be connected to the power sources of the two logic families, respectively, while GND should be connected to ground for both sides of the logic families. It also has four other terminals for the I/O pins. The two terminals marked “A” correspond to the logic signals from the low-voltage logic family, while the two terminals marked “B” correspond to the logic signals from the high-voltage logic family. When operating in this configuration, the I/O pins are bidirectional.

In addition to the I/O pins, the TXS0101DBVT also has two other terminals: HVFLT and ENB. HVFLT is a level-shift circuit that prevents logic high voltages from the high-voltage logic family from propagating to the low-voltage logic family, while ENB is an enable pin that must be pulled low in order for the device to work. This device also has two LEDs that give a visual indication of the logic level of the circuit.

The TXS0101DBVT works on the principle of sourcesynchronous level shifting. This type of level shifting implements a two-step process to ensure maximum noise immunity and prevent signal degradation. In the first step, a buffer stage is implemented to reduce the voltage transitions from one side of the logic family to the other. The second step is to detect the logic level of the two sides and adjust the output logic levels accordingly. This is done using a series of resistors and a comparator circuit. When the logic levels are detected, the TXS0101DBVT adjusts the output level so that it is the same as the input level, but with a higher voltage. This allows signals to be transmitted across voltage systems with minimal signal loss.

The TXS0101DBVT is a versatile device that can be used in a wide range of applications. It can be used to level shift between two voltage families, such as 3.3V and 5V, or to bridge the gap between a low-voltage logic family, such as 2.5V, and a high-voltage logic family, such as 5V. In addition, it can be used in communication between two devices with different logic levels, such as between two microcontrollers with different logic families. It can also be used to drive high-voltage loads from low-voltage logic signals. The TXS0101DBVT has been designed to be highly reliable and is suitable for a wide range of applications in the industrial, automotive, medical, and consumer electronics markets.

In conclusion, the TXS0101DBVT is a versatile and reliable logic level translator and level shifter. It can be used to level shift between two voltage families or two logic families, or to bridge the gap between a low-voltage and a high-voltage logic family. Its source-synchronous level shifting design ensures maximum noise immunity and a minimal signal loss, making it suitable for a wide range of applications in the industrial, automotive, medical, and consumer electronics markets.

The specific data is subject to PDF, and the above content is for reference