TXS0104ED

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TXS0104ED is a 4-channel Bi-directional Level Translator and commonly referred to as a voltage-level translator and level shifter. Its purpose is to handle the voltage level conversion between two different logic systems within the same chip or between two different communication interface protocols and levels. Its primary application is in circuit designs, communications and software environments where logic levels or voltages must be adapted between two or more circuits.

The TXS0104ED is a stand-alone, low-power, high-performance device that operates over a wider range of input and output voltages. It can support both current loop and voltage level signaling between devices, allowing for communication across different systems.

At its core, the TXS0104ED uses input logic level shifters to drive output logic levels such that the desired logic levels are achieved. The output logic level is controlled by either the hardware or through software parameters set by the user. This versatility allows it to be used in a variety of applications from telecommunication networks to consumer electronics and a host of other applications.

The TXS0104ED is widely used for translating low-voltage logic levels, such as those found in consumer applications, to higher-voltage logic levels, such as those used in telecommunications or commercial products. In addition, the device can also be used to translate the levels of signals between different communication interface protocols, such as LVDS, HDMI, and VGA, making it a viable solution for many types of interconnect systems.

The working principle of the TXS0104ED is simple in principle. It translates an input logic level to an output logic level using an internal level shifter. In its simplest form, the level shifter consists of two transistors connected in series, such that when the input logic level is high, the output logic level is low. When the input logic level is low, the output logic level is high. In most applications, the level shifter will be more complex than this, but the basic principle remains the same.

It is important to note that the input and output levels of the level shifter can be adjusted to suit the specific requirements of the application. For example, if a 3.3V logic signal is to be translated to 5V logic signal, the level shifter can be adjusted accordingly. This can be done by either adjusting the level of the input signal, the output signal, or both, to achieve a desired level translation.

The TXS0104ED is an ideal device for low-cost, reliable, and low power level translation. It is suitable for many different types of applications and can easily provide a simple solution for communication interface compatibility across multiple systems. By allowing for the flexibility to adjust the input and output levels, it is possible to design level shifters that can meet the needs of the most demanding applications.

The specific data is subject to PDF, and the above content is for reference