TXS0104EDG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic translators and level shifters are essential for engineers when interfacing with different levels of logic. While there are many available options for translating and shifting levels, the Texas Instruments TXS0104EDG4 is a great, reliable, and cost efficient choice. This application note will discuss the TXS0104EDG4’s component specifications, its application fields, and the principles behind its working.

The TXS0104EDG4 component is an 8-bit, hex non-inverting transceiver with an integrated voltage level translator. It has an 8-bit differential input to differential output with a data rate of 250 megabits per second (Mbps). It is breadboard-compatible, has a low power consumption of 5 mW (typical) at 5 V, and has an operating temperature range of -40 to +125 °C. Other features are pull-up resistors built into the inputs and outputs, separate enable (EN) pins for each bank of the component, the feature of triple-state outputs, and the ability to communicate with both 3.3 V and 5 V logic families.

The TXS0104EDG4 component has a wide range of applications, ranging from simple logic level conversion to advanced data bus networks. Its ability to support up to 250 Mbps transmission rate makes this component great for complex and high speed logic circuits. It can be used to convert data signals between 3.3 V and 5 V, and is commonly used to facilitate communication between sensors and microcontrollers, and to drive relay logic. It can also be used as a bridge between two different logic families or as a logic translator.

The basis behind the functioning of the TXS0104EDG4 component relies on the concept of logic level shifting. Logic level shifting translates a logic signal from one logic family’s voltage to another logic family’s voltage. In the case of the TXS0104EDG4, the voltage shifting is done from 3.3 V to 5 V and vice versa. This is done by using transistors to switch the current based on certain thresholds. When the input signal is below the threshold, the transistor in the lower voltage side is turned off and the switching device in the higher voltage side is turned on. This results in the translation of the logic level to the other logic level.

Another principle that is acheieved through the TXS0104EDG4 is a level shifting of the data rate. Data rate level shifting can be achieved by using a technique known as data bus synchronization. This is done by taking the original data, dividing it into multiple bits, and storing it in a series of flip-flops or registers. These registers are then clocked by one clock, resulting in the output data having the same data rate as the input. The TXS0104EDG4 uses this technique to shift the data rate between two different logic families, resulting in a wide range of applications.

In conclusion, the TXS0104EDG4 has a wide variety of application fields and is a reliable and cost efficient choice for logic translators and level shifters. It features an 8-bit differential input to differential output logic translator that supports transmission rates of up to 250 Mbps, and is capable of interfacing with both 3.3 V and 5 V logic families. Its working is based on two principles: logic level shifting and data rate level shifting, which enable it to achieve its wide range of application fields.

The specific data is subject to PDF, and the above content is for reference