UBT1A471MPD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are electrical components used in a variety of applications, from power supplies to filters and regulators. The UBT1A471MPD is an example of aluminum electrolytic capacitors, and has a wide range of uses in electronic circuits. This article will discuss the application field and working principle of the UBT1A471MPD.

The UBT1A471MPD is a miniature, molded snap-in aluminum electrolytic capacitor with a rated voltage of 10Vdc. It is designed to be used in various circuit applications that require low impedance, such as frequency response, power filtering, and charge/discharge circuits. These applications are possible due to the capacitor’s ability to store large amounts of energy and to release it quickly when needed.

The UBT1A471MPD consists of a cylindrical can with a metalized, anodized aluminum circular case and a snap-in terminal. The capacitor is filled with an electrolyte that absorbs energy when voltage is applied across the capacitor’s electrodes, and stores it in the form of electricity. The two electrodes of the capacitor are insulated from each other by a dielectric material, such as an aluminum oxide layer, which ensures the capacitor will not short-circuit as current flows through it.

The aluminum oxide layer of the UBT1A471MPD is where it produces its voltage-signal separation capabilities. This layer acts as a dielectric between the two electrodes, allowing the capacitor to produce a capacitance without the need for a current. This means that the UBT1A471MPD can store energy more efficiently than other types of capacitors.

The working principle of the UBT1A471MPD is based on the basic principles of electrostatics. As voltage is applied to the two electrodes, a potential difference is created between them. This potential difference creates an electric field, which causes electrons to flow from one electrode to the other. The electrons are attracted to the positive electrode, and repel from the negative electrode, thus creating an electric charge. The electric charge is stored in the dielectric layer, which can then be used for numerous applications.

The UBT1A471MPD has applications in a variety of power supply and signal conditioning circuits. It is typically used in circuits that require low impedance, such as frequency response and power filtering, as well as in charge/discharge circuits. It is also useful in circuits that require an increased capacitance, such as voltage regulation and AC ripple filtering circuits, as well as in electronics that need a quick charge, such as portable devices.

In conclusion, the UBT1A471MPD is an example of an aluminum electrolytic capacitor that is designed for use in a variety of power supply and signal conditioning circuits. Its main application field lies in circuits that require low impedance, and its working principle is based on the basic principles of electrostatics. The UBT1A471MPD is a useful component in electronics that need a quick charge, as well as circuits that require an increased capacitance.

The specific data is subject to PDF, and the above content is for reference