UBT1C332MHD8

Ratings:	--
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.319" (33.50mm)
Size / Dimension:	0.630" Dia (16.00mm)
Lead Spacing:	0.295" (7.50mm)
Ripple Current @ High Frequency:	2.71A @ 100kHz
Ripple Current @ Low Frequency:	1.816A @ 120Hz
Applications:	Automotive
Series:	UBT
Polarization:	Polar
Operating Temperature:	-40°C ~ 125°C
Lifetime @ Temp.:	10000 Hrs @ 125°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	16V
Tolerance:	±20%
Capacitance:	3300µF
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Aluminum electrolytic capacitors are one type of electrolytic capacitor that is widely used in electronics. It consists of two aluminum foils, each coated with a layer of oxide insulation, separated by an electrolyte soaked paper, or polyester films. The basic working principle of aluminum electrolytic capacitors is the same as any other type of capacitor; the difference is the magnitude and type of the capacitor\'s electrical elements. UBT1C332MHD8 is an aluminum electrolytic capacitor type with a wide range of applications.

UBT1C332MHD8 Application Field

The wide usage of UBT1C332MHD8 aluminum electrolytic capacitors in the electric industry is due to its low cost and high temperature characteristics. The UBT1C332MHD8 aluminum electrolytic capacitors are widely used in power electronics, such as switch-mode power supplies and voltage regulators, pulsed power circuits, and energy storage. They are also well-suited for high frequency filter applications, power line noise suppression, and surge suppression.UBT1C332MHD8 aluminum electrolytic capacitors have also been used in battery equipped automotive electronic devices, such as heated seat control modules, charging systems, starter systems, door locks, electric window and door systems, and electric cooling fan control. They are also used in other consumer electronics, like computers, audio systems, automotive audio systems, and gaming consoles.

UBT1C332MHD8 Working Principle

The working principle of UBT1C332MHD8 aluminum electrolytic capacitors is similar to that of other types of electrolytic capacitors. The plate of the aluminum electrolytic capacitor is made from an aluminum foil, with an electrolyte-soaked paper, or polyester film, sandwiched in between. This sets up an electric field between the two aluminum faces of the capacitor, which stores electrical energy.Its capacitance is determined by the amount of electrolytic solution in the capacitor - the greater the amount, the higher its capacitance will be. There is also an upper limit to how much electrolyte can be used, otherwise the aluminum plates will corrode and reduce the capacitor\'s lifespan.The UBT1C332MHD8 aluminum electrolytic capacitor is a type of surface-mount capacitor, and has a wide temperature range - from -55 to +125°C. This makes them suitable for high temperature environments, and they have a higher capacitance than standard aluminum electrolytic capacitors. Due to its good temperature characteristics, the capacitor is often used in motor drive, UPS systems, class D amplifiers, and many other high-power electronics applications.

Conclusion

UBT1C332MHD8 is a type of aluminum electrolytic capacitor, widely used for a variety of electronic applications. It has a large temperature range making it suitable for high temperature applications, and has a higher capacitance than standard aluminum electrolytic capacitors. Its working principle is the same as any other type of electrolytic capacitor - it stores electrical energy between two aluminum plates, determined by the amount of electrolytic solution in it. The UBT1C332MHD8 aluminum electrolytic capacitor is used in power electronics, automotive electronics, consumer electronics, and many other applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description