UBW1C222MHD1TN Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are used in a wide range of engineering applications, from consumer electronics to specialized military hardware. The UBW1C222MHD1TN is designed for use in a variety of applications, such as high frequency switch mode or voltage regulator circuits, signal processing, radio frequency, and power electronics. The device is a high performance version of the standard UBW1F222MHD1TN, offering a higher ripple current rating, better reliability, and longer life.

The UBW1C222MHD1TN is a polarized, surface mount aluminum electrolytic capacitor. It is marked with a “+” sign inside a triangle, and a “−” sign inside a circle to indicate the anode and cathode leads. The capacitor body is constructed of a cylinder of anodized aluminum with the negative electrode, the cathode, attached to the bottom. The cathode cap is made of a nickel coating to provide additional corrosion protection. The positive electrode is connected to the top and is covered with a threaded, non-conductive cap.

These capacitors can operate over a wide temperature range from -55°C to +105°C. The UBW1C222MHD1TN has a rated voltage of 16V, and a maximum ripple current rating of 1.5A RMS. Its capacitance is 2.2uF, and its rated ripple-current is 75mA RMS. The device amounts to a maximum of 80mm in overall body height.

The electrolyte is held within the aluminum casing and serves as the dielectric medium between the anode and cathode. During operation, a thin film of electrolyte forms between the two and stores an electric charge. This charge creates an electric field between the two plates that allows for an exchange of electrons. The amount of charge stored depends on the amount of capacitance.

When the capacitor is in use, the stored energy is released in the form of a current and a voltage. The voltage yields from the electric field created by the anode and cathode, and the current is established as the electrons flow from one electrode to the other. As voltage and current are applied, the charge is replenished and the cycle continues.

The UBW1C222MHD1TN is designed for use in a variety of applications, including high frequency switch mode or voltage regulator circuits, signal processing, radio frequency, and power electronics. Its high performance and low impedance make it suitable for these applications. The long lifetime of the device and its low ESR (equivalent series resistance) make it a suitable choice for use in power supplies or high frequency circuits.

The UBW1C222MHD1TN is a reliable and long lasting aluminum electrolytic capacitor that can be used in a variety of applications. Its high ripple current rating, low impedance, and long lifetime make it an ideal choice for numerous engineering projects. With its high performance and wide temperature range, it is an ideal solution for any application requiring reliable capacitance.

The specific data is subject to PDF, and the above content is for reference