UC282TDTR-ADJ Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear voltage regulators, also known as linear regulator or LDO, are one of the most widely used types of voltage regulators in the electronics industry. The UC282TDTR-ADJ is an adjustable, low-dropout, Linear voltage regulator from Texas Instruments, operating over a wide input voltage range of 2.7V to 12V. The adjustable output of this regulator can be adjusted over a wide range of 1.2V to 24V, depending on the input supply voltage and the resistance of the resistor network used for output setting.

The UC282TDTR-ADJ is a very popular voltage regulator and is used in a wide range of applications. This voltage regulator is used in automotive, industrial and consumer applications, including automotive electronic control modules (ECMs), power converters, telematics, medical electronics and other power systems.

The UC282TDTR-ADJ is a three-terminal regulator, consisting of an input, an output and an enable pin. The input pin is connected to the input supply voltage and the output pin is connected to the output voltage. The enable pin allows the output to be shut off. When the enable pin is high, the output is on, and when the enable pin is low, the output is off.

The working principle of the UC282TDTR-ADJ linear voltage regulator is based on a simple feedback topology. When a load draws current, the output voltage drops. The voltage drop is sensed by a reference voltage inside the regulator, and then the regulator switches on a pass transistor to provide the additional current needed to keep the output voltage constant. The pass transistor is either an NPN or a PNP transistor, depending on the build of the regulator.

The UC282TDTR-ADJ linear voltage regulator also has protection features such as thermal protection, over-voltage protection, and current limit protection. The thermal protection capability prevents the internal temperature from rising beyond a certain level by turning off the pass transistor in the presence of excessive heat. The Over-voltage protection feature prevents the output voltage from going beyond a certain limit by activating the Output Transistor Emitter Resistor (OTER). The current limit protection feature turns off the pass transistor if the current draw from the regulator exceeds the set current limit.

In short, the UC282TDTR-ADJ is an adjustable, low-dropout, Linear voltage regulator with wide input range and wide output range. It is used in a variety of applications, and its working principle is based on a simple feedback topology. It has a number of built-in protection features that protects the device from excessive current draw and over-voltage conditions.

The specific data is subject to PDF, and the above content is for reference