UGF15JTHE3/45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single
The UGF15JTHE3/45 is a high voltage rectifier, manufactured by General Electric. This particular device can be typically used in power supplies with circuits switching up to 1000V DC, and inductive loads. It is ideal for high surge applications with reverse voltage levels as low as 5V, making it suitable for protecting against capacitive, inductive and transformer line transients. However, its low power dissipation and thermal operations features make the UGF15JTHE3/45 an ideal choice for applications such as voltage regulator, high voltage power supplies, inverters and other tape storage displays.

The UGF15JTHE3/45 is also manufactured as a single diode rectifier, which is usually found in circuits where high reliability and surge performance are required; it maintains rectification characteristics even at low reverse voltage levels. This single-diode rectifier is designed for use in applications such as audio amplifiers, battery chargers, and high-voltage motors. Furthermore, its low power dissipation can be beneficial to minimize system power loss.

When the UGF15JTHE3/45 is used as a single diode rectifier, it works by using the principle of rectification to turn an alternating current (AC) into a direct current (DC). The rectification process essentially breaks an incoming sine wave into positive and negative halves, allowing the current to flow in only one direction. This type of DC creates a smoother, more predictable output, which is necessary for a variety of digital devices, particularly those that are voltage sensitive.

In addition to the single-diode rectifier, the UGF15JTHE3/45 is also available in dual-diode rectifier configuration, which essentially divides the AC voltage into two paths, one that is rectified and the other that is left unrectified. Dual diode rectifiers are used primarily in high frequency switching applications that have very high surge currents. The dual diode configuration also helps to reduce circuit distortion, allowing the circuit to handle higher voltages or currents without compromising the system. This is due to the fact that the dual diode configuration allows the circuit to switch faster, thus reducing the amount of time required for the peak current to pass between the two branches of the circuit.

The UGF15JTHE3/45 is also available in a three diode rectifier configuration which is suitable for high-frequency switching applications that require a high surge current. This rectifier configuration combines the two halves of the alternating current together and rectifies them into a single three-phase waveform. The three-phase output is then able to be reduced to a single-phase current for use in devices that require that type of power.

Overall, the UGF15JTHE3/45 is an efficient and reliable rectifier device that provides a high level of performance in both single diode and dual diode configurations. The device is available in an array of sizes and options, making it suitable for applications ranging from voltage regulator, high voltage power supplies, inverters, and other tape storage displays. It performs exceptionally in high frequency switching applications and its low power dissipation helps to minimize system power loss. It is also UL listed and CSA certified, making it a safe and reliable rectifier device.

The specific data is subject to PDF, and the above content is for reference