UGF18CCTHE3/45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Arrays category encompass a wide number of components used to direct electric current in a specified way. The UGF18CCTHE3/45 application field and working principle are typical examples of a diode array, a device that converts alternating current to direct current and can be used to control the flow of electricity through different stages of a circuit. This type of diode can also act as an actuator to switch signals between two or more states. The working principle of a diode array relies on the use of diodes arranged in an array, each of which has a specific forward and reverse voltage and current rating. When an electric current enters the array, it is divided equally across each diode in the array. The voltage drop across each diode, determined by its reverse voltage, dictates the amount of current flowing, and in what directions, through the diode.

The UGF18CCTHE3/45 is a diode array that can be used in low to medium current voltage applications and is typically rated to a maximum guaranteed reverse voltage of 18V and a forward current of 2.5A. It consists of three diodes and is divided into four components - the anode, cathode, gate and substrate. The anode is the positive terminal of each diode and the cathode is the negative terminal. The anode and cathode pins on the UGF18CCTHE3/45 can be used to drive and detect a signal, as well as couple it to other devices. The substrate is also an important part of the diode array, allowing for heat dissipation during operation.

The UGF18CCTHE3/45 operates in the same way as other diode arrays. Applied current flows from the anode to the cathode in a single direction, with a voltage drop occurring due to the diodes’ resistance. This voltage drop controls the current driving through the gate, which is then amplified and brought to an output terminal. This allows the diode array to act as an amplifier, providing amplification and signal attenuation. When the signal is no longer required, the reverse voltage is used to prevent further current flow. A voltage limiter may also be connected to the anode to limit the amount of current flow in both directions and can be used to reduce power consumption.

The UGF18CCTHE3/45 is typically used in precision rectification circuits. Such circuits normally have a controlled voltage drop, allowing for more accurate and reliable control of current flow in the diode array. The voltage drops across the diodes can also be used to control the speed of a motor, allowing for speed control. Additionally, the UGF18CCTHE3/45 can be used for noise elimination, signal waveform control and protection in power circuits.

In conclusion, the UGF18CCTHE3/45 is a three-diode array typically used for low to medium current applications with a guaranteed maximum reverse voltage of 18V and a forward current of 2.5A. Its anode and cathode pins can be used to couple it to other devices and its substrate allows for efficient heat dissipation. The voltage drops across its diodes can be used to control the speed of electric motors, while it can also provide signal waveform control and protection in power circuits. This makes the UGF18CCTHE3/45 a versatile and reliable option when building precision rectification circuits.

The specific data is subject to PDF, and the above content is for reference