UHE1J181MPD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are electrical components with two electrical contacts separated by a dielectric material that has an electric field strength. They are usually constructed using an insulating material, such as paper, plastic or ceramic, and a conductive material, such as aluminum, tin or copper, to form two closely spaced plates that are electrically insulated from each other. The electric field between the two plates creates an electrical charge, which is stored in the capacitor.The UHE1J181MPD is an aluminum electrolytic capacitor and is used in a variety of applications. Most commonly, it is used as an energy storage device in power supply systems and in DC-DC converters. It can also be used as an input filter to suppress high frequency ripple, as an output filter, as an EMI filter, and for other applications.The UHE1J181MPD is a surface mount device, which means that instead of using conventional through-hole technology for mounting, the capacitor is soldered directly onto the circuit board. This makes the capacitor less bulky and easier to install in compact applications.The UHE1J181MPD has an operating voltage of 250 VDC and a capacitance of 0.18uF. It has a rated temperature range of -40 to +105°C. It has a maximum ESR of 0.3 Ohms (at 100 kHz at 25°C). It has a load life of 2000 hours at 105°C, and it has good vibration resistance and a very good electrical stability.The construction of the UHE1J181MPD is quite simple. It consists of analloyed aluminum sheet on the anode, and a manganese dioxide formed on a dielectric paper sheet on the cathode. A cellulose coating is applied to both sides of the dielectric paper sheet to provide insulation and shield the cathode from atmospheric contamination.The working principle of the UHE1J181MPD is quite straightforward. When a voltage is applied to the capacitor, the electrical current causes a reaction between the electrolytic solution and the two plates, creating an electric charge. This charge is stored in the capacitor until the voltage is removed. When the voltage is removed, the electric charge is released. The capacitor can only hold so much charge and therefore, it acts as a filter for signals and frequencies. It can be used to reduce ripple and filter out unwanted frequencies and noise.Overall, the UHE1J181MPD is a reliable and affordable aluminum electrolytic capacitor that is used in many applications. It is small and easy to install, and is robust enough to withstand a wide range of temperatures and vibration. It is a great choice for power supply systems and DC-DC converters, as well as for EMI filtering.

The specific data is subject to PDF, and the above content is for reference