Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The ULN2803ADWG4 is an integrated circuit, which is a high current, high voltage, and general purpose Darlington transistor array. It consists of eight Darlington pairs that feature four open-emitter outputs with common emitters. The ULN2803ADWG4 is a widely used Darlington transistor array device in both industrial and consumer electronics due to its slim package, cost-effectiveness, and ease-of-use.

Features

• High Voltage Output: 500 V
• High Current Output: 2 A
• Low Input Current: 0.5 mA
• High Bandwidth: 120 kHz
• Small Package (SOT-23-6)

Applications

The ULN2803ADWG4 is mainly used in embedded systems to drive and control a variety of motors, relays, and other higher power output components. Some of the most common applications for the ULN2803ADWG4 are:

• Printers and Plotters
• Automatic Test Equipment (ATE)
• Automotive Applications
• Security Systems
• Access Control Systems
• Fire Alarm Systems

Working Principle

The ULN2803ADWG4 consists of eight Darlington pairs integrated on the same chip. Each Darlington pair is composed of two bipolar transistors, an ‘input’ transistor and an ‘output’ transistor. The input transistor is used to amplify the input signal before it is sent to the output transistor. The output transistor is used to control the current flow that is needed to drive a higher power output device.

When a voltage is applied to the input pin of the ULN2803ADWG4, the current is amplified by the input transistor, which produces a larger current from the output transistor. This larger current is then used to drive higher power output devices. The gain of the output transistor is determined by the amplification factor of the input transistor. For the ULN2803ADWG4, the amplification factor is usually in the range of 500-1000, depending on the input current.

Conclusion

The ULN2803ADWG4 is a common, cost-effective, and easy to use Darlington transistor array. It is mainly used to drive motors, relays, and higher power output components in embedded systems. It consists of 8 Darlington pairs, each of which is composed of two bipolar transistors, an input transistor and an output transistor. The input transistor amplifies the input signal before it is sent to the output transistor, and the output transistor controls the current used to drive a higher power output device.

The specific data is subject to PDF, and the above content is for reference