UMA1A220MDD1TP Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are widely used in many electronics due to their relatively large capacitance in a small size. The UMA1A220MDD1TP is just one example of this type of capacitor, with a capacitance of 220 microfarads and a mechantical shock rating of 250g with 11ms. They are designed with a life expectancy of up to 3,000 hours, and are available with an operating temperature range of -55 to +125 degrees Celsius.

Application Fields

The UMA1A220MDD1TP is mainly used in electronic circuits as a low-impedance electronic component. Its application fields are mainly in power supply, motor start and audio coupling. In power supplies, they help maintain a constant current while limiting the noise frequency to enable smooth, consistent operation. For motor start applications, they add additional power required to start a motor by limiting the initial inrush current. Lastly, in audio coupling, they act as a low-pass filter, removing any high frequency noise from an audio signal with minimal signal degradation.

Working Principle

UMA1A220MDD1TP capacitors are very reliable and have few failure points due to their construction. This type of capacitor consists of two electrodes on either side of a central electrolyte, with the electrolyte acting as an electrical insulator. In order for electrical current to flow through the capacitor, the electrolyte must be composed of a material that is a good conductor. This material may be a liquid or a solid material, but the most popularly used is aluminum oxide.

The aluminum oxide acts like a dielectric layer, creating two electrical plates on either side of the electrolyte. When a voltage is applied to the capacitor, the electrons from the negative plate are attracted to the positive plate, and vice versa. This creates an electrical field within the electrolyte, allowing for current to flow through it. As the voltage is increased, the charge on the plates also increases, creating more and more electrical energy within the capacitor.

The UMA1A220MDD1TP also has an internal resistance, called the Equivalent Series Resistance or ESR, that limits the amount of current that can be allowed through the capacitor. This is used to ensure the capacitor does not become overloaded, as too much current could cause the device to fail. By decreasing the ESR, you can increase the maximum current allowed through the capacitor.

In conclusion, the UMA1A220MDD1TP is a reliable aluminum electrolytic capacitor designed for use in many electronic circuits. It has a capacitance of 220 microfarads and a mechanical shock rating of 250g with 11 ms. It can operate between -55 and +125 degrees Celsius, and has an expected life expectancy of up to 3,000 hours. It is primarily used in power supplies, motor start applications, and audio coupling circuits. The working principle of the capacitor is based on the creation of an electrical field between two charged plates, with the electrolyte acting as an electrical insulator. Finally, its internal resistance, called the Equivalent Series Resistance or ESR, limits the amount of current that can be allowed through the capacitor.

The specific data is subject to PDF, and the above content is for reference