UPJ2D4R7MPD1TD Capacitors

Series:	UPJ
Packaging:	Tape & Box (TB)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	4.7µF
Tolerance:	±20%
Voltage - Rated:	200V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	5000 Hrs @ 105°C
Operating Temperature:	-40°C ~ 105°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	60mA @ 120Hz
Ripple Current @ High Frequency:	96mA @ 10kHz
Lead Spacing:	0.197" (5.00mm)
Size / Dimension:	0.394" Dia (10.00mm)
Height - Seated (Max):	0.650" (16.50mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors (AECs) are one of the most commonly used types of capacitors. They are widely used in a variety of applications across the electronics industry, from computers and cell phones to signal control and motor drives. AECs are made from aluminum foil electrodes, separated by a paper-type insulator and filled with an electrolytic solution. When current passes through the AEC, the surface of the anode reacts with the electrolyte and is covered by an oxide layer, which acts as an insulator. This oxide layer is called the dielectric, and it is what makes the capacitor able to store electrical charge.The UPJ2D4R7MPD1TD aluminum electrolytic capacitor (AEC) is a radial, non-polarized capacitor designed for efficient energy storage. The device features low ESR (Equivalent Series Resistance) and ESL (Equivalent Series Inductance) values, a long life, high reliability and a wide operating temperature range. What’s more, it offers a medium capacitance ranging from 15uF to 220uF, operating voltage of 6.3V up to 63V and an acceptance rate of tolerance of ±20% (down to 10% for special orders).The UPJ2D4R7MPD1TD AEC is mainly used in consumer and commercial electronics applications, such as emergency lighting, uninterruptible power supplies, computer systems, consumer electronics and automotive electronics. It can also be used in communications and military applications. Due to its unique design, the UPJ2D4R7MPD1TD offers superior performance and reliability compared to other aluminum electrolytic capacitors.In terms of construction, the UPJ2D4R7MPD1TD AEC is a radial, non-polarized, double-sleeve capacitor with a plastic case. This design offers superior reliability and extended service life over other types of capacitors. The UPJ2D4R7MPD1TD features a wire-in-leaded design and extended anode-case contact area. This design ensures better charge and discharge performance, as well as improved capacitance stability over temperature. In terms of performance, the UPJ2D4R7MPD1TD has a nominal capacitance of 10,000 uF and an ESR (Equivalent Series Resistance) of 0.3 Ohms. It has a tolerance rating of ±20% (down to 10% for special orders). It is rated for an operating voltage range of 6.3 V to 63 V, with a rated surge voltage of 93 V and insulation resistance of over 5,000 MΩ. In terms of circuit design and operation, the UPJ2D4R7MPD1TD AEC should be connected in parallel with other components. The recommended input voltage should be lower than the rated voltage of the capacitor. The load current should not exceed the rated current for the capacitor. The device is best used with a low-resistance ground connection and should be mounted on a printed circuit board with the correct polarity.In summary, the UPJ2D4R7MPD1TD aluminum electrolytic capacitor is a high-performance, reliable AEC designed for efficient energy storage. It offers superior performance and reliability compared to other aluminum electrolytic capacitors and is ideal for a wide range of consumer and commercial electronics applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description