URZ1A103MHD1TN Capacitors

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.063" (27.00mm)
Size / Dimension:	0.709" Dia (18.00mm)
Lead Spacing:	0.295" (7.50mm)
Ripple Current @ High Frequency:	1.955A @ 10kHz
Ripple Current @ Low Frequency:	1.7A @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	URZ
Operating Temperature:	-55°C ~ 105°C
Lifetime @ Temp.:	1000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	10V
Tolerance:	±20%
Capacitance:	10000µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Box (TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Aluminum electrolytic capacitors, also known as electrolytic capacitors, are polarized capacitors mainly composed of an aluminum oxide dielectric layer, two current-conducting electrodes (cathode and anode), and a liquid electrolyte. Generally speaking, electrolytic capacitors are most often used for various types of filtering tasks, such as improving the power factor of a power system or eliminating ripple voltage in a signal. As an important type of capacitors, aluminum electrolytic capacitors have been widely used in many different areas of electronics. One such type of aluminum electrolytic capacitor is the URZ1A103MHD1TN, which can be used in a variety of applications and has several different working principles.

The URZ1A103MHD1TN

The URZ1A103MHD1TN is a non-polarized aluminum electrolytic capacitor, manufactured by the Taiwanese multinational electronic components manufacturer, Lite-On. It is a cylindrical, axial-leaded, non-solid aluminum electrolytic capacitor with a voltage rating of 25V and a capacitance of 10µF. It is mainly used in DC switching power supplies, telecommunication equipment and DC/DC converters.

Application Fields

Due to its wide range of features, the URZ1A103MHD1TN is used in a variety of applications in electronics. It is often used to provide an extra decoupling capacitance for a power supply, as it can absorb transient currents and voltage transients that might be created when a circuit is energized, stabilized or de-energized. It is also often used to filter out ripple voltage, which can cause unwanted noise in a circuit, degrading its performance. Additionally, the URZ1A103MHD1TN can also be used as a boost capacitor, providing a burst of energy to circuits that require a large amount of current quickly.

Working Principle

The URZ1A103MHD1TN is based on the principle of electrolytic capacitance. It consists of two aluminum foil plates separated by an insulating layer of aluminum oxide which acts as the dielectric. The electrolyte, which is located between the two aluminum plates, is a saturated solution of boric acid. The boric acid solution acts as a bridge between the two plates, allowing electrons to pass from one plate to the other, thus creating a current flow. This current is stored in the capacitor, allowing it to be used for various applications.

Conclusion

In summary, the URZ1A103MHD1TN is an aluminum electrolytic capacitor used for a variety of applications, such as providing extra decoupling capacitance for power supplies, eliminating ripple voltage, and providing a boost of energy when needed. It is based on the principle of electrolytic capacitance and consists of two aluminum plates separated by an insulating layer of aluminum oxide, which acts as its dielectric, and an electrolyte, which is a saturated solution of boric acid. This capacitor has been manufactured by Lite-On and used in DC switching power supplies, telecommunication equipment and DC/DC converters.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description