URZ2D101MRD6

Operating Temperature:	-40°C ~ 105°C
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.866" (22.00mm)
Size / Dimension:	0.787" Dia (20.00mm)
Lead Spacing:	0.394" (10.00mm)
Ripple Current @ Low Frequency:	420mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Polarization:	Polar
Series:	URZ
Lifetime @ Temp.:	1000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	200V
Tolerance:	±20%
Capacitance:	100µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Aluminum Electrolytic CapacitorsAluminum electrolytic capacitors, as the name suggests, are components that store electrical energy, usually measuring in the microfarad range, which are typically used in electronics circuits. These components are widely used in applications such as resonators, oscillators, power supplies, and voltage regulators.Aluminum electrolytic capacitors are usually divided into two categories: polarized and non-polarized. Polarized capacitors are constructed with two acid-etched aluminum plates that are separated by a paper spacer, which is then saturated with electrolyte to form the dielectric medium. Non-polarized capacitors are typically constructed of aluminum foils separated by a dielectric, which is usually made of mica or plastic material.The URZ2D101MRD6 aluminum electrolytic capacitors are a type of non-polarized capacitor. They are typically used in resonators, oscillators, and power supply circuits, due to their high capacitance and low impedance. Working PrincipleThe URZ2D101MRD6 aluminum electrolytic capacitors are constructed of two layers of aluminum foil with a dielectric material between them. This dielectric material is usually mica or a plastic material. The functioning of the capacitor is based on the principle of electrical charge storage, which is also known as capacitance. A capacitor essentially stores an electrical field, and when a voltage is applied across the device this electric field creates a current flow in the circuit. The capacitance of the device increases with the thickness of the dielectric material, which provides a higher storage capacity for the electric field. The URZ2D101MRD6 capacitors have a dielectric material of mica or a plastic material, and the capacitance of these capacitors varies from 0.1 µF to 100 µF. Application FieldThe URZ2D101MRD6 aluminum electrolytic capacitors are mainly used in resonators, oscillators, and power supply circuits. Resistor circuits use the capacitor for its electrical properties for filtering, coupling, or tuning. Oscillator circuits use capacitors for their ability to store charge in the electrical field and to create a stable output signal. In power supply circuits, they are typically used to store energy during the peak hours, helping to even out the inconsistencies in the power grid. In addition, these capacitors can also be used in voltage regulator circuits, where they provide increased capacitance, allowing for better voltage regulation. While these capacitors are non-polarized and can be used in AC circuits, they are not ideal for signal applications, as their low impedance can lead to degraded signal quality. ConclusionThe URZ2D101MRD6 aluminum electrolytic capacitors are a type of non-polarized capacitors typically used in resonators, oscillators, power supply circuits, and voltage regulators. They are constructed of two layers of aluminum foil separated by a dielectric material, such as mica or plastic, and their capacitance varies from 0.1 µF to 100 µF. These capacitors are an ideal solution for applications requiring high capacitance and low impedance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description