USA1V4R7MDD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are the most common type of capacitor available, and are made up of two aluminum foils separated by an oxide layer, and rolled together with a separator, into a cylindrical package. The two aluminum foils are etched to prevent short-circuiting, and the separator prevents the electric current from passing between the two plates. The capacitor is then filled with an electrolyte solution which allows an alternating electric current to pass through the capacitor, allowing charge to build up. This electric charge is stored in the capacitor, and later released when needed for the circuit in which it is used.

The main advantage of aluminum electrolytic capacitors is their high capacitance-to-volume ratio, which allows them to be used in a variety of applications. They have very high capacitance, as well as high voltage ratings. They are typically used as decoupling capacitors, filter capacitors and general energy storage, and are often found in motor drives and switching regulated power supplies.

USA1V4R7MDD Application Field and Working Principle

The USA1V4R7MDD aluminum electrolytic capacitor is a polarized capacitor with non-solid electrolyte, designed specifically for use in AC and pulse applications, where high voltage and large currents are required. This capacitor is ideal for pulse applications, filter circuits and general power supply applications. The USA1V4R7MDD capacitor is rated for a voltage of 400V and a current rating of 0.6A.

The USA1V4R7MDD aluminum electrolytic capacitor is constructed from two aluminum foils, which are separated by a layer of an insulating material, known as the dielectric. The capacitor is then filled with an electrolyte solution which allows for the storage of the electric charge during the charging and discharging of the capacitor. The electrodes of the capacitor are connected to the power source and the circuit, allowing electric current to pass through it. During the charging process, the electric field present between the two plates forces electrons to move from the anode to the cathode. This process continues until the capacitor is charged to the required voltage level. The capacitor then begins to release the stored charge into the circuit, as the applied current is reduced.

The USA1V4R7MDD aluminum electrolytic capacitor is commonly used in AC and pulse applications, where high voltage and large currents are required. These capacitors are used in switch mode power supply circuits, and motor control applications, as well as for energy storage, and for filtering capacitor applications. They are often used for AC input filtering, and power supply decoupling.

The USA1V4R7MDD aluminum electrolytic capacitor is a reliable and versatile component, which can be found in a variety of circuits. It is important to ensure that the correct size is used, to prevent damage to the device or to the circuit. In addition, the capacitor should also be stored and handled correctly, to ensure that its performance is not affected by environmental conditions.

The specific data is subject to PDF, and the above content is for reference