UUG2D220MNL1MS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are a category of polarized capacitors that make use of an electrolyte and are the most widely used capacitors in the electronic industry. Aluminum electrolytic capacitors consist of a rigid metal casing, anodized aluminum foil and a paper or plastic spacer soaked in an electrolytic fluid, usually aqueous solution. The capacitor is produced by rolling and anodizing aluminum foil to create the electrodes. This layer of oxide acts as a dielectric and increases the capacitance of the capacitor. Electrodes are then separated from the anode by a separator that contains an electrolytic fluid. The separator also prevents a short circuit between the two electrodes.

The UUG2D220MNL1MS is a type of aluminum electrolytic capacitor. It is used in numerous applications including power supplies, timers, amplifiers, light dimmers, and any other application requiring a output capacitor with a relatively high load. It is a long life, low impedance, low leakage capacitor that is able to handle high ripple currents. The UUG2D220MNL1MS also has a very low failure rate compared to other similar capacitors.

To understand how an aluminum electrolytic capacitor works, it is important to first have an understanding of electrostatics. In electrostatics, a capacitor stores electric energy in an electric field. The capacitance of the capacitor is determined by the charge of the two electrodes, the space between them, and the permittivity of the dielectric material. When an electric field is imposed on the capacitor, electric charges are stored on the two electrodes, creating an electric field. This electric field is proportional to the electric energy stored in the capacitor.

When a voltage source is connected to the terminals of the capacitor, the capacitor will start charging. This causes electrons to flow onto one terminal while leaving the other. This process continues until the voltage at the terminals of the capacitor is equal to the applied voltage. At this point, electrons would cease to flow and the capacitor would reach full charge. The voltage across the capacitor produces a small electric field that represents the stored electric energy.

Once the voltage drops, the electrons on the terminals of the capacitor start to recombine, and the capacitor will slowly discharge to its original state. This process is known as dielectric relaxation, and it occurs in all capacitors. In an aluminum electrolytic capacitor, however, the difference is that the aluminum electrodes act like a chemical reservoir. When a voltage is applied to the capacitor, ions from the electrolyte solution flow onto the electrodes, and these ions are held by the surface of the aluminum electrode, resulting in a higher capacitance.

In summary, the UUG2D220MNL1MS is a type of aluminum electrolytic capacitor that can be used in a wide variety of applications. It is long-life, low-impedance, and leakage-resistant, while also being able to handle high ripple currents. The main purpose of this capacitor is to store electrical energy in an electric field, which is created when a voltage is applied to the terminals. This electric field is necessary in order to give the capacitor its unique properties. The aluminum electrodes also act as a chemical reservoir, allowing the capacitor to store more electrical energy.

The specific data is subject to PDF, and the above content is for reference