UVK1H010MDD1TD Capacitors

Series:	UVK
Packaging:	Tape & Box (TB)
Lead Free Status / RoHS Status:	--
Part Status:	Not For New Designs
Moisture Sensitivity Level (MSL):	--
Capacitance:	1µF
Tolerance:	±20%
Voltage - Rated:	50V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	2000 Hrs @ 85°C
Operating Temperature:	-40°C ~ 85°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	17mA @ 120Hz
Ripple Current @ High Frequency:	34mA @ 10kHz
Lead Spacing:	0.098" (2.50mm)
Size / Dimension:	0.197" Dia (5.00mm)
Height - Seated (Max):	0.492" (12.50mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic CapacitorsAluminum electrolytic capacitors are one of the most commonly used capacitors in electronics due to their high capacitance-per-volume ratio and their affordability. They are composed of two porous aluminum foils pressed against each other, with a special electrolyte sandwiched between the foils, creating a double-layer capacitor. The dielectric electrolyte is the key part in this type of capacitor; it is essentially a mixture of oxygen and ethylene glycol that acts to increase the surface area and the capacity of the capacitor. Due to the relatively high cost of electrolyte, aluminum electrolytic capacitors are usually limited to low-voltage, low-frequency applications.The UVK1H010MDD1TD aluminum electrolytic capacitor is a high-voltage, low-loss, low-immunity type capacitor with a rated working voltage of 1,000 volts. It is designed for use in high-voltage, high-frequency applications such as high-frequency switching power supplies and inverters. The capacitor has a capacitance of 10,000 microfarads and a maximum operating temperature of 105°C.The working principle of the UVK1H010MDD1TD is as follows: when a voltage is applied across the capacitor\'s terminal, the capacitor\'s anode and cathode electrodes both become polarized, generating a potential difference across them. This potential difference creates an electric field within the capacitor, which then causes the ions in the electrolyte to move towards the cathode. As the ions move, they create a charge imbalance that results in a flow of electrons from the anode to the cathode, creating a current that charges the capacitor. As the capacitor charges, the stored electric energy increases, reaching a peak when the capacitor is fully charged.The UVK1H010MDD1TD is typically used in applications such as motor drive and control, power supplies, timer controllers, power converters and reactors, high voltage switching circuits, and in telecommunications systems. It is suitable for a wide range of operating frequencies up to 10kHz, making it an ideal choice for high frequency switching applications. Additionally, the capacitor has a high ripple current rating, making it a good choice for applications where high stability, energy storage, and low noise levels are needed.In conclusion, the UVK1H010MDD1TD aluminum electrolytic capacitor is a high-voltage, low-loss, low-immunity type capacitor with a rated working voltage of 1,000 volts. It is ideal for use in high-frequency switching power supplies and inverters, as well as a wide range of other applications. The working principle is based on the creation of an electric field within the capacitor, which causes a flow of electrons to charge the capacitor and store electrical energy. With its high capacitance-per-volume ratio and high ripple current rating, the UVK1H010MDD1TD is an ideal choice for applications where high stability, energy storage, and low noise levels are necessary.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description