UVZ0J331MED1TA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used in electronics due to their high energy density, low price, and availability in a variety of sizes and capacitance values. These capacitors consist of a metalized aluminum foil as the electrodes and a dielectric in the form of a thin layer of oxide film on the foil. The two most important characteristics of an aluminum electrolytic capacitor are its capacitance and its equivalent series resistance (ESR).

The UVZ0J331MED1TA is a type of aluminum electrolytic capacitor. It has a small temperature coefficient and a low ESR, which make it suitable for high-frequency applications. The capacitance value of this capacitor is 0.33 µF and it has a maximum working voltage of 50 V. It is available in 6.3 x 7.7 mm, 7.3 x 10.2 mm, and 8.0 x 10.2 mm packages.

The capacitor has two main working principles. First, the capacitor will act as a storage device, storing charge when electrical current is applied. This stored charge is then discharged when the current stops flowing. Second, the capacitor acts as a filter, attenuating or blocking high frequency signals while allowing low frequency ones to pass. This is due to the capacitance of the capacitor, which increases as the frequency of the signal decreases. As a result, aluminum electrolytic capacitors are used in both low- and high-frequency signals for filtering and storage.

The UVZ0J331MED1TA capacitor is used in a wide range of applications. It can be used in power supplies, switching regulators, radio frequency applications, filter networks, and as a decoupling device to reduce noise. Its small size and low ESR make it suitable for miniature circuits and it can also be used in high-temperature settings. Its low temperature coefficient also makes it ideal for temperature compensation networks. In addition, this capacitor can be used in audio systems, motors, and other electronic devices where a stable voltage is required.

In conclusion, the UVZ0J331MED1TA is a type of aluminum electrolytic capacitor with a capacitance of 0.33 µF and a maximum working voltage of 50 V. It has two main working principles: it acts as a storage device, storing charge when electrical current is applied, and it acts as a filter, allowing low frequency signals to pass while attenuating high frequency signals. This makes it suitable for a variety of applications including power supplies, switching regulators, radio frequency applications, filter networks, and more. It is also suitable for miniature circuits and high-temperature settings due to its small size and low temperature coefficient.

The specific data is subject to PDF, and the above content is for reference