UWS1C221MCL1GS Capacitors

Series:	UWS
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Obsolete
Moisture Sensitivity Level (MSL):	--
Capacitance:	220µF
Tolerance:	±20%
Voltage - Rated:	16V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	2000 Hrs @ 85°C
Operating Temperature:	-40°C ~ 85°C
Polarization:	--
Ratings:	--
Applications:	High Temperature Reflow
Ripple Current @ Low Frequency:	215mA @ 120Hz
Ripple Current @ High Frequency:	344mA @ 10kHz
Lead Spacing:	--
Size / Dimension:	0.315" Dia (8.00mm)
Height - Seated (Max):	0.394" (10.00mm)
Surface Mount Land Size:	0.327" L x 0.327" W (8.30mm x 8.30mm)
Mounting Type:	Surface Mount
Package / Case:	Radial, Can - SMD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors: UWS1C221MCL1GS application field and working principle

Aluminum electrolytic capacitors are electrochemical capacitors that use an electrolyte to store electrical charge. They are mainly used to store energy temporarily between alternating current (AC) and direct current (DC) cycles. The UWS1C221MCL1GS is an aluminum electrolytic capacitor, typically used in low voltage applications such as power supplies, LED lighting and computers.

Capacitor Basics

Capacitors are devices that store electrical energy, allowing it move between components without interruption. They are composed of two conducting plates with an insulating dielectric material between them. Electric current passes through the capacitor, and energy is stored in the form of an electric charge.

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors consist of two aluminum foils, which are separated by a special paper covered with an electrolytic solution. In order to increase capacity, the distance between the foils is made as small as possible, without making contact, and the area of the plates is increased. An advantage of aluminum electrolytic capacitors over other types of capacitors is their ability to store a large amount of charge per unit volume.

UWS1C221MCL1GS

The UWS1C221MCL1GS is an aluminum electrolytic capacitor, typically used in low-voltage applications such as power supplies, LED lighting and computers. This capacitor has a rated voltage of 10V and a capacitance of 220μF. The UWS1C221MCL1GS has a long service life of 2000 hours, a maximum operating temperature of 85°C, and a low- impedance design that makes it suitable for high-frequency use.

UWS1C221MCL1GS Application Field

The UWS1C221MCL1GS is a suitable capacitor for a wide range of electrical and electronic applications, including power supplies, LED lighting, audio equipment, computers, and other consumer electronics. It is also highly resistant to temperature changes, making it an ideal choice for applications that require stability over a wide temperature range.

UWS1C221MCL1GS Working Principle

The working principle of the UWS1C221MCL1GS is based on electrochemical reactions. This capacitor consists of two aluminum foil plates separated by an electrolyte solution. When a voltage is applied across the capacitor, the positive and negative charges start to build up on either side of the capacitor. This causes an electric current to flow, and energy to be stored electrochemically in the form of an electric charge. When the voltage is removed, the charges remain stored in the capacitor, allowing the capacitor to ‘hold’ the energy until the voltage is reapplied.

Conclusion

The UWS1C221MCL1GS is an aluminum electrolytic capacitor, designed for low voltage applications. Its long service life, high-frequency operation and resistance to temperature changes make it a suitable choice for a variety of electrical and electronic devices. The working principle of the UWS1C221MCL1GS is based on electrochemical reactions, which allow it to store energy in the form of an electric charge.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description