V20120C-M3/4W

Series:	TMBS®
Packaging:	Tube
Part Status:	Active
Diode Configuration:	1 Pair Common Cathode
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	120V
Current - Average Rectified (Io) (per Diode):	10A
Voltage - Forward (Vf) (Max) @ If:	900mV @ 10A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	700µA @ 120V
Operating Temperature - Junction:	-40°C ~ 150°C
Mounting Type:	Through Hole
Package / Case:	TO-220-3
Supplier Device Package:	TO-220AB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - ArraysThe V20120C-M3/4W is a diodes rectifiers array specifically designed for a wide range of applications such as power supplies, motor drives, and rectification circuits. This device is also suitable for automotive and industrial applications that require a higher level of reliability.What is a diode rectifiers array? A diode rectifiers array is a type of diode that contains multiple individual rectification diodes connected in parallel. These diodes are most commonly used in the rectification of alternating current (AC) signals. This type of device is often referred to as a bridge rectifier, as it resembles a bridge, joining two electrical sources together.The V20120C-M3/4W is a DPDT (Dual-Polarity Double-Throw) device in a PDIP (Plastic Dual-In-Line Package) format, with two common cathode lines and two separate anode lines. The device features a maximum forward current of 1.5A, a peak surge current of 8A, and a maximum reverse voltage of 100V. The device requires a minimum voltage of 220V AC to operate.The V20120C-M3/4W is a low-cost solution for a wide variety of applications. It is easily mounted on a circuit board and offers superior performance compared to other rectifier options. The device’s simple design allows for easy integration into a variety of circuits.When an AC signal enters the V20120C-M3/4W, it is rectified and the voltage is converted into a direct current (DC) signal. The two common cathode lines and two separate anode lines direct a portion of the signal through one of the rectify bridges, and the other portion through the other rectification bridge. The rectified signal is then passed through anode lines which are connected to the load.The output of the device can also be configured to provide a signal with a lower amplitude by connecting the two cathode lines together. This will reduce the amplitude of the output, but still allow the signal to be rectified. The output of the V20120C-M3/4W can also be used to control an external circuit such as a motor drive or power supply.The V20120C-M3/4W is a reliable, cost-effective solution for a wide range of applications. Its robust design and superior performance ensures that it will fulfill its application requirements. The device is also easy to install and integrate into existing circuits, making it a great choice for any application that requires reliable power conversion and rectification.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description