Allicdata Part #: | WW2FB10R0-ND |
Manufacturer Part#: |
WW2FB10R0 |
Price: | $ 0.13 |
Product Category: | Resistors |
Manufacturer: | Stackpole Electronics Inc. |
Short Description: | RES 10 OHM 1.5W 1% AXIAL |
More Detail: | 10 Ohms ±1% 1.5W Through Hole Resistor Axial Moist... |
DataSheet: | WW2FB10R0 Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.11138 |
Series: | WW |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 10 Ohms |
Tolerance: | ±1% |
Power (Watts): | 1.5W |
Composition: | Wirewound |
Features: | Moisture Resistant |
Temperature Coefficient: | ±50ppm/°C |
Operating Temperature: | -55°C ~ 350°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.156" Dia x 0.370" L (3.96mm x 9.40mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Resistors are among the most commonly used electronic components. These devices are designed to control the amount of current that flows through an electrical circuit. One type of resistor is a through hole resistor, which refers to a series of resistors that are mounted in holes that pass completely through a printed circuit board or other location. Through hole resistors are typically manufactured in either axial or radial leaded packages. The WW2FB10R0 is a radial-leaded through hole resistor with a maximum resistance of 10 MΩ.
Applications of the WW2FB10R0 are varied but typically include power-supply filtering, signal line termination, signal line buffering, and other applications where a high-value, low-impedance resistor is required. The WW2FB10R0 is also suitable for precision current sensing and voltage divider circuits, as well as for DC blocking and frequency filtering circuits. This type of resistor is especially suitable for any applications demanding high additional capacitance, such as snubbers.
The WW2FB10R0 through hole resistor features a glass body in an aluminum package with four radial leads extending from a body of 20mm in length. The resistor offers a wide temperature range from -55 to 125 degrees Celsius, and is rated for up to 5 Watts of power. This type of resistor is also stable over humidity and time and offers a low capacitance over a wide temperature range.
The working principle of the WW2FB10R0 resistor is relatively simple. When current flows through the resistor, the resistor’s resistance will cause a voltage drop across it, which is proportional to the current and the resistance value. This voltage drop across the resistor causes a decrease in current, resulting in a controlled flow of current in the circuit. Patters of resistance are also implemented in the resistor design to achieve specific characteristics, such as frequency or temperature response for specific applications.
The WW2FB10R0 through hole resistors are manufactured to precise specification to ensure consistent performance and reliability. The resistor is designed for reliable long-term service and is suitable for industrial applications where a high resistance value and long resistance stability is required. The resistor also offers excellent surge stability to meet the demands of the most demanding applications.
The WW2FB10R0 through hole resistor is an attractive solution for many applications due to its small size, precise resistance values, and wide temperature range. With a maximum resistance of 10 MΩ and five watts of power, this resistor offers reliable performance and superior stability for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
WW2FTR100 | Stackpole El... | 0.14 $ | 1000 | RES 0.1 OHM 1.5W 1% AXIAL... |
WW2FTR200 | Stackpole El... | 0.14 $ | 1000 | RES 0.2 OHM 1.5W 1% AXIAL... |
WW2FTR220 | Stackpole El... | 0.14 $ | 1000 | RES 0.22 OHM 1.5W 1% AXIA... |
WW2FTR330 | Stackpole El... | 0.14 $ | 1000 | RES 0.33 OHM 1.5W 1% AXIA... |
WW2FTR500 | Stackpole El... | 0.14 $ | 1000 | RES 0.5 OHM 1.5W 1% AXIAL... |
WW2FTR150 | Stackpole El... | 0.14 $ | 1000 | RES 0.15 OHM 1.5W 1% AXIA... |
WW2FBR100 | Stackpole El... | 0.15 $ | 1000 | RES 0.1 OHM 1.5W 1% AXIAL... |
WW2FBR180 | Stackpole El... | 0.15 $ | 1000 | RES 0.18 OHM 1.5W 1% AXIA... |
WW2FBR500 | Stackpole El... | 0.15 $ | 1000 | RES 0.5 OHM 1.5W 1% AXIAL... |
WW2FT1R00 | Stackpole El... | 0.12 $ | 1000 | RES 1 OHM 1.5W 1% AXIAL1 ... |
WW2FT1K10 | Stackpole El... | 0.12 $ | 1000 | RES 1.1K OHM 1.5W 1% AXIA... |
WW2FT1K20 | Stackpole El... | 0.12 $ | 1000 | RES 1.2K OHM 1.5W 1% AXIA... |
WW2FT10R0 | Stackpole El... | 0.12 $ | 1000 | RES 10 OHM 1.5W 1% AXIAL1... |
WW2FT100R | Stackpole El... | 0.12 $ | 1000 | RES 100 OHM 1.5W 1% AXIAL... |
WW2FT2K00 | Stackpole El... | 0.12 $ | 1000 | RES 2K OHM 1.5W 1% AXIAL2... |
WW2FT3R30 | Stackpole El... | 0.12 $ | 1000 | RES 3.3 OHM 1.5W 1% AXIAL... |
WW2FT4R70 | Stackpole El... | 0.12 $ | 1000 | RES 4.7 OHM 1.5W 1% AXIAL... |
WW2FT13R0 | Stackpole El... | 0.12 $ | 1000 | RES 13 OHM 1.5W 1% AXIAL1... |
WW2FT1R50 | Stackpole El... | 0.12 $ | 1000 | RES 1.5 OHM 1.5W 1% AXIAL... |
WW2FT5R00 | Stackpole El... | 0.12 $ | 1000 | RES 5 OHM 1.5W 1% AXIAL5 ... |
WW2FT825R | Stackpole El... | 0.12 $ | 1000 | RES 825 OHM 1.5W 1% AXIAL... |
WW2FB10R0 | Stackpole El... | 0.13 $ | 1000 | RES 10 OHM 1.5W 1% AXIAL1... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...