WW2FTR100

Series:	WW
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	100 mOhms
Tolerance:	±1%
Power (Watts):	1.5W
Composition:	Wirewound
Features:	Moisture Resistant
Temperature Coefficient:	±90ppm/°C
Operating Temperature:	-55°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.156" Dia x 0.370" L (3.96mm x 9.40mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to WW2FTR100 Application Field and Working Principle

The WW2FTR100, also known as a through hole resistor, is an essential component used in various electronic circuits. It is designed to provide an insulated electrical resistance in order to reduce the current flow or control the current flow in the circuit. Through hole resistors are mainly classified into two categories, i.e. linear resistors and non-linear resistors. These devices are typically made of materials such as carbon, metal film, wirewound, and ceramic composition.

Types of Through Hole Resistors

Linear resistors are designed to provide a constant resistance throughout their operating temperature range. These resistors are typically made from carbon or metal film and have a wide selection of resistance ratings available. These resistors are also commonly used in voltage regulators and load balancing circuits.Non-linear resistors, as the name suggests, have a variable resistance or control over the current flowing through them. These resistors are made from wirewound or ceramic composition materials and they have a higher power rating than linear resistors. Non-linear resistors are mainly used in rectifiers, amplifiers, and audio systems.

WW2FTR100 Application Fields

Through hole resistors are mainly used in applications such as audio amplifiers, power supplies, processors, interface circuits, and digital signal processing. They are also used in avionics, medical equipment, automotive electronics, and military applications.WW2FTR100 is also often used in industrial, home, and commercial appliances such as air conditioners, refrigerators, washing machines, water heaters, and lighting fixtures. It is also used in electronic measuring instruments such as thermometers, voltmeters, and flowmeters.

WW2FTR100 Working Principle

WW2FTR100 works using the principle of resistance in circuits. This principle states that when current flows through a device or component, there is an associated voltage drop that takes place in that device. The voltage drop is a result of Joule heating effect due to the presence of electrical resistance. In other words, WW2FTR100 controls the current flow and voltage levels in the circuit by offering an adjustable resistance.WW2FTR100 also works on the principle of Ohm’s law which states that the voltage across a resistor is directly proportional to the current flowing through it. This law is applicable in simple DC circuit applications. The WW2FTR100 acts as a voltage divider in complex circuits such as amplifier circuits. This voltage divider is used to split the input voltage in a particular ratio and the output voltage can be adjusted by varying the resistance of the resistor.

Conclusion

WW2FTR100 through hole resistors are used in a wide variety of applications due to their simple working principle and adjustable resistance. These resistors are made from various materials, such as carbon, metal film, wirewound, and ceramic composition. In addition, these devices are widely used in power supplies, audio amplifiers, industrial, home, and commercial appliances. The working principle of WW2FTR100 is based on the principle of resistance in circuits and Ohm’s law.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description