WW2FT1R50

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are electric components used to control the flow of current in a circuit. They are also used in power regulation and signal regulation. WW2FT1R50 is a type of through hole resistor, which is a metal film resistor with a power rating of 0.5 W. The construction of this resistor, common to many others, consists of a metal core, a Nichrome film wrapped around the core, and two wire leads. The metal material used for the core is typically nickel and will vary depending on the resistor type.

In addition to its 0.5-W power rating, WW2FT1R50 has a resistance range of 5-50 ohms. It is also able to withstand currents up to 0.5A and voltages up to 300V. The resistor is shown in the following diagram:

The outer dimensions of the WW2FT1R50 are 20.5mm x 6.5mm x 5.2mm, and its maximum resistor temperature range is °C 155. It also includes both horizontal and vertical mount versions, making it suitable for a variety of applications.

Due to its size and power rating, WW2FT1R50 is well-suited for applications such as power regulation, motor control, noise suppression, and surge protection. It is also used in electrical signal control, as it is able to maintain its resistance in a wide range of temperatures and frequencies. As such, it is useful in radio frequency circuits.

WW2FT1R50 operates using the same basic working principle as other through hole resistors. The Nichrome film is wrapped around a nickel core, creating a linear resistance. The voltage applied to the resistor causes an electric current to flow from one lead to the other. The amount of current passing through the resistor is determined by the amount of resistance, and the resulting voltage is determined by Ohm\'s law. The current flowing through the resistor is proportional to the voltage applied. Thus, the voltage is reduced as it passes through the resistor, resulting in a proportional reduction in the current.

WW2FT1R50 is a reliable and cost effective through hole resistor. Its resistance rating, power rating, voltage rating and temperature range make it suitable for a vast array of applications. Additionally, its low-cost yet effective construction make it an inexpensive choice to use inside of electronics. WW2FT1R50 can be found in many industrial, commercial, and consumer settings, and its resistance dictates what type of current will reach its destination in the circuit.

The specific data is subject to PDF, and the above content is for reference